throttle body porting

[Rare99Firehawk]

I know this has been asked many times, does anybody have a link that shows how to port the tb step by step? I want to do the work myself.

[splitfinger09]

subscribed would like to know as well.

[jag42420]

I've never really seen an in depth guide, but there are tons of pics out there before and after. All you're really looking to do is smooth out the edges, and blend the outer TB to meet with the area around the blade as smoothly as possible. If you have a dremel or die grinder, that's all you really need. You can get flap wheels and wire wheels from several places. I got mine from http://www.bulletindustries.com/cata...p/cPath/82_140 . Here are a few before and after links for reference:

http://joshker99.home.comcast.net/tbmod.htm

http://www.phantomss.com/camaro/portedtb/index.shtml

http://www.installuniversity.com/ins...sity/index.htm

[Rare99Firehawk]

thanks for the quick reply. I sent him an e-mail to see if he still does the work.

[Killer_bluebird]

This is a pretty detailed one. I did mine using it.

Good Luck!

[Rare99Firehawk]

thanks that was the kind of info I needed to do the job. I'll do mine later this week