Results 1 to 12 of 12

slp lid

This is a discussion on slp lid within the External Engine forums, part of the LSx Technical Help Section category; The air lid that is on my car already has SLP on it but it stock what is the differences ...

  1. #1
    Junior Member 0235thannviSS's Avatar
    Join Date
    Dec 2006
    Location
    nc
    Posts
    18

    red
    02 35th SS

    slp lid

    The air lid that is on my car already has SLP on it but it stock what is the differences between my stock one and the one you buy from SLP

  2. #2
    The Pulse of the Maggots SicWs6's Avatar
    Join Date
    Apr 2006
    Location
    Fayetteville, NC
    Age
    33
    Posts
    296

    NBM
    1999 Trans Am WS6

    do you mean it is a stock lid with SLP stickers on it? The difference is Stock: should have a huge air baffle closer to the TB. SLP; should be just the lid, w/ SLP painted on it!!
    "How's your whole...Family?

    Visit My Garage!
    http://www.fquick.com/SicWs6

  3. #3
    Junior Member 0235thannviSS's Avatar
    Join Date
    Dec 2006
    Location
    nc
    Posts
    18

    red
    02 35th SS

    it has SLP stamped in to it but it is not white

  4. #4
    Ebaaaaaaaaa Speedy_Gonzales's Avatar
    Join Date
    Sep 2006
    Location
    Georgia
    Posts
    11,019

    Black
    2014 Camaro 1LS

    nice ride man

  5. #5
    The Pulse of the Maggots SicWs6's Avatar
    Join Date
    Apr 2006
    Location
    Fayetteville, NC
    Age
    33
    Posts
    296

    NBM
    1999 Trans Am WS6

    hmmm... im not sure. can you put a pic up?

  6. #6
    38 of 139 PontiacFan's Avatar
    Join Date
    Jul 2005
    Location
    Kearney, NE
    Posts
    931

    Black
    2001 Pontiac

    Quote Originally Posted by 0235thannviSS View Post
    The air lid that is on my car already has SLP on it but it stock what is the differences between my stock one and the one you buy from SLP
    Does it have a marking in the lower right that says "Blackwing"?
    If so, take it off & send it to me. I'll give ya $50 for it & you can use that money towards a new SLP aftermarket lid.
    Make sure ya send all the attachments also.






    j/k, ...
    If it does indeed have that marking, KEEP IT. DO NOT SELL IT. It is one of the best made lids out there. There are no other lids that will provide any better or significant results.
    Fit, finish, & quality construction makes it the best lid there is.

    Now, If it does not have the 'Blackwing' on it, & it does say SLP, ..., Chances are it's an aftermarlet lid that someone has put on the car. (I do not know if you bought the car new at this point of the conversation.)

  7. #7
    Member Ripper415's Avatar
    Join Date
    Sep 2005
    Location
    NY
    Age
    32
    Posts
    378

    Pewter
    2002 Camaro SS

    where did you hear that the blackwing was any better than an aftermarket lid? i know it's better than the stock p.o.s with the baffles but i always heard it was the same as basically any other aftermarket lid out there. i know they're rare because they dont make them anymore but as far as extra power i doubt it.

  8. #8
    Formulatastic yellowv's Avatar
    Join Date
    Dec 2006
    Location
    S. Florida
    Age
    39
    Posts
    1,271

    Red
    98 Formula /93 Z28

    Quote Originally Posted by Ripper415 View Post
    where did you hear that the blackwing was any better than an aftermarket lid? i know it's better than the stock p.o.s with the baffles but i always heard it was the same as basically any other aftermarket lid out there. i know they're rare because they dont make them anymore but as far as extra power i doubt it.
    He never said it would make any more power. He said it would be the same poerwise as the others, but it's made better and will fit better. Which it is and will.

  9. #9
    38 of 139 PontiacFan's Avatar
    Join Date
    Jul 2005
    Location
    Kearney, NE
    Posts
    931

    Black
    2001 Pontiac

    Quote Originally Posted by yellowv View Post
    He never said it would make any more power. He said it would be the same poerwise as the others, but it's made better and will fit better. Which it is and will.

    Yea, ..., what he said!, ...,
    "Fit, finish, & quality construction makes it the best lid there is."

  10. #10
    Junior Member xtreme's Avatar
    Join Date
    Mar 2007
    Location
    bloomington
    Posts
    21

    Red & Black w/T-tops
    00 Z28 Camaro

    What do you guys think of the K&N intake and filter w/no lid? looks pretty sweet, but I am not sure. I am debating on getting the SLP or the K&N. Help me out. Thanx!

  11. #11
    UberTapping Friction Pimp Anthracis's Avatar
    Join Date
    Mar 2007
    Location
    Omar's Tittie Taverna & Grill, Deh Rawod
    Posts
    1,447

    18D Cock Diesel
    1999 Z28; 98 SS #2043 RIP

    The minimal gains from the K&N setup does not justify the additional cost. Just stick with the lid.

  12. #12
    Junior Member xtreme's Avatar
    Join Date
    Mar 2007
    Location
    bloomington
    Posts
    21

    Red & Black w/T-tops
    00 Z28 Camaro

    really? thanx! I appreciate the advice.
    Mez

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •