SLP Cold Air Induction

**dopitz** · 07-02-2008, 05:19 PM

How hard is it to install a SLP cold air induction kit along with a SLP mass air flow sensor - how long will it take, and is there anything I should watch for.

Thanks

**Tyler_LS1** · 07-02-2008, 05:25 PM

its pretty easy to install, just a few tabs and bolts

**Tyler_LS1** · 07-02-2008, 05:28 PM

Just a few pics to help

**dopitz** · 07-02-2008, 05:33 PM

Thank you - the pics help

**dopitz** · 07-02-2008, 05:35 PM

Should I replace the 98 stock manifold with a SLP also?

**Tyler_LS1** · 07-02-2008, 05:36 PM

Originally Posted by dopitz

Should I replace the 98 stock manifold with a SLP also?

I would, save your money on buying a new MAF and put it towards an LS6 intake

**SSTODD** · 07-03-2008, 07:41 AM

Originally Posted by Tyler_LS1

I would, save your money on buying a new MAF and put it towards an LS6 intake

+1, Do not change the maf unless you want lean codes.

**thiscatiskool** · 07-04-2008, 10:11 AM

how much do the SLP cold air intakes actually help??? i bought my car 02 trans am and it had it installed on it with a K&N filter. The only thing i could see that it did was suck up all the dirt and trash going under the car b/c my air filter was filthy

**slpcamaro** · 07-04-2008, 10:18 AM

Originally Posted by thiscatiskool

how much do the SLP cold air intakes actually help??? i bought my car 02 trans am and it had it installed on it with a K&N filter. The only thing i could see that it did was suck up all the dirt and trash going under the car b/c my air filter was filthy

If it's sucking up more stuff then it's got to be sucking up more air right there fore it helps.

back to the questions it works good not to hard to install just read directions first. The maf I got one hurts more then helps, it would help with a tune but just throwing it on stock not a good idea +1 to use the money for the ls6 and then just get some cleaner and clean your stock maf.

**Mr. Luos** · 07-04-2008, 10:56 AM

Stay away from SLP.

***doberman 152*** · 07-04-2008, 11:04 AM

Originally Posted by Mr. Luos

Stay away from SLP.

SLP FTW..

**Mr. Luos** · 07-04-2008, 11:09 AM

Originally Posted by doberman 152

SLP FTW..

It's your money you are wasting then.

Overpriced parts.
Underperforming parts with outdated designs.
And absolutely NO customer care.

Nothing like being called a liar by an SLP rep.

That shitass company relies on the un-informed modders. Here, Tech, and any LS1 site...you will find most hate SLP.

***doberman 152*** · 07-04-2008, 11:15 AM

Originally Posted by Mr. Luos

It's your money you are wasting then.

Overpriced parts.
Underperforming parts with outdated designs.
And absolutely NO customer care.

Nothing like being called a liar by an SLP rep.

That shitass company relies on the un-informed modders. Here, Tech, and any LS1 site...you will find most hate SLP.

I just like to see your reaction on the SLP threads..

**slpcamaro** · 07-04-2008, 12:11 PM

Originally Posted by Mr. Luos

Stay away from SLP.

some items yes but the air system is good.

**Mr. Luos** · 07-04-2008, 01:33 PM

Originally Posted by slpcamaro

some items yes but the air system is good.

Lid. Linelock.

That's it.

**0verkill** · 07-04-2008, 03:55 PM

Originally Posted by Mr. Luos

Lid. Linelock.

That's it.

i dont even have luck with the lid it rubed the paint of the hood and the clips that hold it down pop off all the time. its all a pice of crap.

**Tyler_LS1** · 07-05-2008, 04:30 PM

Originally Posted by 01 T/A

i dont even have luck with the lid it rubed the paint of the hood and the clips that hold it down pop off all the time. its all a pice of crap.

ive had great luck with my lid,

**INMY01TA** · 07-06-2008, 07:32 AM

Originally Posted by Mr. Luos

Lid. Linelock.

That's it.

I like my SLP driveshaft loop too.

**00z28bubba** · 07-06-2008, 09:54 AM

Originally Posted by 01 T/A

i dont even have luck with the lid it rubed the paint of the hood and the clips that hold it down pop off all the time. its all a pice of crap.

the person who had my car before had that same problem with the lid but i just took it off and put it back on the where it looked like it lined up. no heating or cutting on m part just slipped it off and slipped it on.