PCV Hose and such

**deleonm** · 10-28-2006, 12:03 AM

well, i was doing some scheduled maintenance on the car and decided to change my PCV filter. well the hose that holds the filter is wasted, rotted out big time. So I went to the dealership to get a new one, well, it seems you have to buy the whole damn hose assembly. damn....were the exact words out of my mouth.. so, this damn hose assy cost me 130.00 dollars. also, you ever change out that hose assy on a 98 Z28, half the engine is under the dash.

**mrr23** · 10-28-2006, 06:11 AM

just get you a piece of 3/8 hose from your local parts store. no need to replace the whole thing. and yes, i have replaced the entire PCV system on the wife's car. you might want to check in the rear section where three hoses come together. that's another place it likes to rot out at. it's really not that hard to do. just a little tight in the back.

**SeVeReDiStOrTiOn** · 10-28-2006, 12:14 PM

Little tight in the back? You'd have better luck fisting a virgin...

**BlinkFan0072** · 11-01-2006, 07:04 PM

I had the same problem.. rotted right in the bend of the line.. i just forked out the cash wish i hadn't but oh well

**Phlash_riot** · 11-13-2006, 07:46 PM

could have replace the whole thong for the LS6 set-up for half that cost
But even better can i just get a crank case vent filter on the valve covers and plug everything else up