pacesetter lt's/ory HELP!?!?

**xtreme_rob** · 03-14-2009, 06:02 AM

So, I recently purchased a set of used pacesetter lt's and ordered the ORY pipe brand new from marylandspeed. The lt's came with a a plate at the end of the collector that has three holes for bolts and looks like it requires a gasket, the y pipe is a slip in and clamp style... what should I do? the part number for the headers is 70-2255 but when i look online, all the 70-2255 dont have that plate for bolting it on.

Thanks for the help.

**Ghawk996** · 03-14-2009, 06:53 AM

U need to purchase the flange adapter which has another 3 bolt plate to attach to the headers and there is no gasket making it metal to metal. The adapter should then slide into ur y pipe and the clamp it down. Basically Hedman headers uses this set up.

**xtreme_rob** · 03-14-2009, 07:25 AM

Originally Posted by Ghawk996

U need to purchase the flange adapter which has another 3 bolt plate to attach to the headers and there is no gasket making it metal to metal. The adapter should then slide into ur y pipe and the clamp it down. Basically Hedman headers uses this set up.

Any idea where i can find those, i have found gaskets to fit... but no clue on where to find an adapter.. i think im just gunna get rid of these headers and buy a brand new set...

**JoshieDoom** · 03-14-2009, 07:40 AM

1. Either cut the flanges off and use the slip fit...
2. Cut the ory down a bit on each end and install the flanges onto them.

I take it these are welded to it?

autozone. Ebay. lots of places sell them. If you need some help shoot me a PM. Google is your friend

**Ghawk996** · 03-14-2009, 07:40 AM

Check summit racing or give them a call but I am not exactly sure that you have pacesetters. Look under hedman headers on thier site again though u shouldn't need gaskets metal to metal.