pacesetter installation tips?

**ullose2** · 01-03-2006, 05:09 PM

I am going to install my new pacesetters this weekend with an ory pipe. Is there any tips or suggestions I need to know before starting this. any info is apprciated

I do have the o2 ext. and and the o2 sims. and percy's alum. header gaskets.

**adham** · 01-03-2006, 05:16 PM

i just got done finishing mine
alot of patience and perseverence is all i can tell you!!
if it takes u more than a day, its ok because it took me 3!

**easyericvan** · 01-03-2006, 05:25 PM

Make sure your y pipe is secure. I got mine put in last week and my y pipe rattles.

**01mmmz28** · 01-03-2006, 05:43 PM

take your time, label all the bolts and set them aside, you can re-use the stock gaskets(to save you some $$).....I did and alot of my friends did w/ no probs. Make sure you have the correct tools. If you don't have access to a lift, get some good sturdy jack-stands and a good 2 ton+ jack just for good measure. change your plugs while your in there.
It should not take you that long, my friends and I did a set of pacesetter long tubes in the driveway in 4 hours. My mid-lenths, y-pipe, and suspension stuff all took 4 1/2 hours. So, get a couple of buddies who are skillfull and you should be done in an afternoon. get it welded also, use the clamps until then, but welding it up good will ensure that you wont have leaks..........good luck bro !!!!