Results 1 to 7 of 7
-
01-11-2010, 03:13 PM #1
- Join Date
- Nov 2009
- Location
- east coast
- Posts
- 23
Red- 1999 firebird Formula
Is my oil pressure sender intacked
Can anyone tellme if my oil pressur sender is still intacked. I tried my best to guide the break booster hose so i woul dnot damage it. I dont want to install anything until I know it is intact. When you say it get damaged I am assuming you are refeering to the single wire connected to it. Thanks.
Here is a photo
http://s890.photobucket.com/albums/a...t=P1060475.jpg
-
01-12-2010, 12:54 PM #2
link no worki worki
-
01-12-2010, 02:19 PM #3
those will normally break completely off so if it's still attached to the block it's most likely fine unless you just cracked it or something. I broke mine clean off as do most people.
-
01-12-2010, 05:11 PM #4
if it looks like that then its fine
-
01-12-2010, 06:47 PM #5
Man go ahead and replace it. It would be a pain if it started leaking after you install the intake, gm sender's do take a big fat crap after a few years.
-
01-14-2010, 07:42 AM #6
yea +1 If your at that point I would just replace it. You will kick your self down the raod if you don't. you can still get to it but wow this way you can actually see the damn thing to put it in.
-
01-15-2010, 08:27 PM #7
if you are replacing it you need a special socket that you can get at o'reilly's for about 10 bucks
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: 98 Z28 Oil pressure sender?
By Bigjames25 in forum General HelpReplies: 17Last Post: 09-20-2013, 05:25 AM -
Oil Pressure Sender
By pajeff02 in forum ToolsReplies: 11Last Post: 10-17-2010, 04:31 PM -
Oil pressure sender *pic*- LS6 installed!
By weberje in forum External EngineReplies: 15Last Post: 02-24-2008, 04:19 PM -
Electric Fuel Pressure Sender
By Whiteboycntdnce in forum General HelpReplies: 3Last Post: 10-02-2007, 05:38 PM
Bookmarks