Page 1 of 2 12 LastLast
Results 1 to 20 of 26

LS6 Intake Manifolds

This is a discussion on LS6 Intake Manifolds within the External Engine forums, part of the LSx Technical Help Section category; Just to let you know, SLP is selling new LS6 intakes for around $375 new. So before you drop the ...

  1. #1
    Member speedkills's Avatar
    Join Date
    Aug 2006
    Location
    Arlington, TX
    Posts
    100

    Pewter
    1999 Chev Z28 Camaro,

    LS6 Intake Manifolds

    Just to let you know, SLP is selling new LS6 intakes for around $375 new. So before you drop the same price, a little less or a little more on ebay for a used one check out SLP.

    They were too high on ebay from the start only because idiots would pay that much for a used intake manifold.

  2. #2
    Rollo Tomassee AKIRA's Avatar
    Join Date
    Aug 2005
    Location
    Outside the box
    Age
    37
    Posts
    2,887
    $375 new? Do you have a link? Thats cheaper than Summit's price and they buy in bulk, so thats odd...

  3. #3
    The Bandit Wesman's Avatar
    Join Date
    Apr 2006
    Location
    NJ
    Posts
    4,033

    SGM
    1998 Trans Am WS6

    SLP is weird like that.

    Most of their stuff is way overrpriced, but once in a while they'll have a good deal on certain things, like the LS6 manifold.

  4. #4
    Member Jon7I2's Avatar
    Join Date
    May 2006
    Location
    Chicago
    Age
    31
    Posts
    307

    Navy Blue Metallic
    99 Formula M6

    thats not too bad of a deal, espesically considering its right from SLP.

  5. #5
    Junior Member fastz99's Avatar
    Join Date
    Mar 2006
    Location
    chicago
    Posts
    58

    white
    1999 camaro z28

    here is the link for anyone that wants it

    http://www.slponline.com/view_produc...39&BIG=30039-1

  6. #6
    Rollo Tomassee AKIRA's Avatar
    Join Date
    Aug 2005
    Location
    Outside the box
    Age
    37
    Posts
    2,887
    Hmm, why does the egr part look weird? Ive never seen a fitting there.

  7. #7
    Member Jon7I2's Avatar
    Join Date
    May 2006
    Location
    Chicago
    Age
    31
    Posts
    307

    Navy Blue Metallic
    99 Formula M6

    Quote Originally Posted by AKIRA View Post
    Hmm, why does the egr part look weird? Ive never seen a fitting there.
    Yeah, u got a good point. What the hell is that piece. It's almost like they took an Ls1 manifold and pluged up the EGR.

  8. #8
    car smart member
    Join Date
    Nov 2005
    Location
    aug, ga
    Age
    32
    Posts
    56

    white
    2000 / TA ...lol

    intake

    i dont think i would buy it. doesnt seem kosher

  9. #9
    Awaiting Activation
    Join Date
    Mar 2006
    Location
    LS1 land
    Age
    29
    Posts
    1,667
    the retards probably just put the wrong picture. Im sure the manifold is a genuine new LS6 with no EGR.

  10. #10
    The Bandit Wesman's Avatar
    Join Date
    Apr 2006
    Location
    NJ
    Posts
    4,033

    SGM
    1998 Trans Am WS6

    Quote Originally Posted by 99blueZ View Post
    the retards probably just put the wrong picture. Im sure the manifold is a genuine new LS6 with no EGR.
    Exactly. SLP is a legit company, they aren't selling knock off shit.

    They probably just put the wrong picture, accuracy and customer service aren't exactly their strong points

  11. #11
    Member Jon7I2's Avatar
    Join Date
    May 2006
    Location
    Chicago
    Age
    31
    Posts
    307

    Navy Blue Metallic
    99 Formula M6

    I did not actually think they were pawning off ls1 intakes as ls6's. I just don't like slp that much and ws making a joke at their expense.

  12. #12
    Member lrader99's Avatar
    Join Date
    Nov 2005
    Location
    NW Georgia
    Age
    32
    Posts
    397

    flat black
    no that is def an LS6 manifold it has no bolt hole...looks like what theyve done is make a port for the EGR...lingenfelter also makes a kit i think it was like 50 bucks or something to make an LS6 an EGR manifold for emissions purposes

  13. #13
    Member edbird's Avatar
    Join Date
    Apr 2006
    Location
    hammond Ind
    Posts
    270

    red
    1999 trans am convert

    Yeah,the one in the pics,they sell for around 550.00$.It's for us guys with EGR(98,99,00).They say "no provisions" above that pix means it doesn't have the egr connection.They just have the same pix for both.Also note for the price they include the cooling tube you will need going from LS1 to LS6 and I think they include new gaskets.Thats why I can't figure out why people are paying 350.00 for used!!!!!

  14. #14
    LS1-TA schrysler's Avatar
    Join Date
    Jan 2006
    Location
    utah
    Age
    34
    Posts
    427

    Red
    1998 Trans Am Vert

    so will that work for a 99 LS1?
    1998 Trans Am Vert, M6, Soon to be full of goodies......

  15. #15
    Member 89LX's Avatar
    Join Date
    May 2006
    Location
    East Coast North Carolina
    Posts
    429

    Navy
    2000 Z28 M6

    P/n: 30041

    They are showing the picture for P/N: 30041 which does have provisions. The brass fitting you are seeing comes along with compression washers. You cut your old EGR tube as per instructions and place the new brass fitting and compression washes for installing. Same manifold I installed on my 2000 Z28. I am sure it is a honest slip. The verision with EGR is slighty higher so the picture shown would be an extra good deal.
    2000 Z28 M6, SLP Lid, SLP Bellows, SLP UD,
    P&P Maf, TB By-Pass, PS Shorties, LS6 Intake, FAST 78mm TB, Hooker CB, Hurst Billet, Front Tower Brace, small 218/218....527/527....114 cam.
    337rwhp/348rwtq

  16. #16
    Member edbird's Avatar
    Join Date
    Apr 2006
    Location
    hammond Ind
    Posts
    270

    red
    1999 trans am convert

    Slightly higher?The 30039(the one on sale now) is 370.75 and the one with EGR is 549.95.....Thats 180.00 difference!
    Either one will work on a '99 but if you get the one on sale you will have to block off egr tube on exhaust and the SES light will come on and a code will be thrown.I've read at least a hundred posts of guys doing this without any ill effects and all are very happy with results.

  17. #17
    Member 89LX's Avatar
    Join Date
    May 2006
    Location
    East Coast North Carolina
    Posts
    429

    Navy
    2000 Z28 M6

    Shop around

    SLP w/provisions $459.95 @ Imperformance.com and SLP w/o provisions $370.75 @ Slponline.com. $89.20 difference. Like everything else on the LS1 I need to shop around before buying. Actually I purchased mine off EBay new with provisions for around $350 to the door (can't remember the exact figure). Regardless they both will work and in hind sight probably would have gone with no provosion as cutting the stock EGR tube to fit is a bit iffy but muddled through it. Good luck

  18. #18
    Member edbird's Avatar
    Join Date
    Apr 2006
    Location
    hammond Ind
    Posts
    270

    red
    1999 trans am convert

    Thats a good price for the egr intake! I went to that site,but it seems to be a search engine.Can you be more specific on the final destination?Or maybe I got it wrong.It's" imperformance.com" right?

  19. #19
    Member 89LX's Avatar
    Join Date
    May 2006
    Location
    East Coast North Carolina
    Posts
    429

    Navy
    2000 Z28 M6

    LS6 Intake Manifold


  20. #20
    Member 89LX's Avatar
    Join Date
    May 2006
    Location
    East Coast North Carolina
    Posts
    429

    Navy
    2000 Z28 M6

    Marylandspeed


Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Intake manifolds?
    By AFWS6 in forum External Engine
    Replies: 19
    Last Post: 03-06-2011, 05:31 PM
  2. Intake Manifolds?
    By jetaws6 in forum External Engine
    Replies: 29
    Last Post: 02-05-2010, 09:19 AM
  3. Intake manifolds
    By Jason Schneeweiss in forum GM Trucks
    Replies: 3
    Last Post: 08-21-2006, 11:40 AM
  4. Intake Manifolds
    By GUSHER in forum General Help
    Replies: 2
    Last Post: 06-17-2006, 07:40 AM
  5. WTB: LS1 Intake Manifolds
    By ls1_ss in forum Parts Wanted / Trade
    Replies: 8
    Last Post: 10-17-2005, 09:22 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •