Results 1 to 8 of 8
Thread: Intake interchangeability
-
11-24-2006, 05:22 PM #1
Intake interchangeability
Will the LS2/LS7 intake interchange on the LS1?
Are there any horsepower gains with the swap, if they are interchangeable?
-
11-24-2006, 05:28 PM #2
- Join Date
- Jul 2005
- Location
- Earth
- Age
- 47
- Posts
- 3,365
414 RWHP 395 RWTQ- 00 Black Ram Air Trans Am
LS6 can, I am 99% sure the LS2 is not a direct bolt on to a LS1
-
11-24-2006, 05:41 PM #3
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
LS2 will fit. Needs a larger throttle body or an adaptor for the LS1 throttle body.
I doubt the LS7 intake fits. Although I am sure someone has made it work.
LS6 intake > LS2 intake on a stock cubed LS1.2008 Trailblazer SS
Yank PTB3600, Kooks 1 7/8" LT's, 4" intake, E-fans, Magnaflow, Sonnax kit, tranny cooler, tune.
Lowered, HID's, tinted.
1999 Pontiac Trans Am WS.6 #1747 SOLD
531.1 RWHP 481.3 FT/Pounds all motor.
-
11-26-2006, 01:41 PM #4
- Join Date
- Jul 2006
- Location
- indiana
- Age
- 41
- Posts
- 1,018
black, 05 Roush- black, 99 T/A WS.6
LS2 intake is similar to the 90mm Fast intake correct.
-
11-26-2006, 02:49 PM #5
yep, similar to the fast intake. to throw an ls2 intake on your ls1 you'll also need the coolant crossover pipe and plugs. I went ahead and changed my rails out at the same time and went to a fast 90 TB.
-
11-26-2006, 03:36 PM #6
-
11-26-2006, 04:22 PM #7
from all that i've read, the LS2 underperformed the LS6 intake. the LS7 intake will require the LS7 heads due to the 11* design.
Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
-
11-28-2006, 12:56 PM #8
Good information, I really appreciate it. My only other dilema is finding one for a descent price. I'll be damned if I am going to pay $350 or $375 for a used intake. I think that is a Barrett - Jackson price, opening bid.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: GTO Oil Pan interchangeability
By Roothawg in forum External EngineReplies: 0Last Post: 06-17-2011, 07:13 PM -
Question: Interchangeability
By cammed goat in forum GTOReplies: 8Last Post: 11-07-2010, 06:02 PM -
Question: Interchangeability
By Jarlaxle in forum Automatic TransmissionReplies: 7Last Post: 11-19-2009, 07:15 PM -
Question: Interchangeability (take two)
By Jarlaxle in forum Manual TransmissionReplies: 4Last Post: 11-12-2009, 06:21 PM -
Gear set interchangeability(sp)??????
By pewter99ta in forum DrivetrainReplies: 1Last Post: 12-18-2005, 12:56 PM
Bookmarks