Results 1 to 9 of 9
Thread: Intake
-
11-30-2007, 11:24 AM #1
Intake
I found an LS6 intake from some1 online. It came off an 04 GTO but it will still fit my 98 T/A right? I asked him if he had the blockoff plate for the EGR and he said he didnt. He said his egr was in the back??? What does that men, doesnt the EGR hose come from the front (top) of the intake? Any1 know where i can buy the blockoff plates?
-
11-30-2007, 01:44 PM #2
no1 knows??
-
11-30-2007, 02:28 PM #3
-
11-30-2007, 02:51 PM #4
- Join Date
- Jul 2005
- Location
- Jacksonville, FL
- Posts
- 2,723
I've seen posts where it is supposed to fit, you can double check by the part number. After removing your EGR the only block off plate you'll need is for the passenger side header.
-
11-30-2007, 04:19 PM #5
- Join Date
- May 2007
- Location
- houston
- Posts
- 130
black- 2001 z28
there shouldnt be any provisions on his intake for the 04 gto. hes probably thinking of the map sensor in the back. 01 and newer did not come equipped with egrs. it will fit with no problems as long as you follow the stuff on ls1howto.
-
11-30-2007, 05:23 PM #6
well wut about drilling the bottom of it. I heard u hafta drill a little bit on the bottom for it to fit on the car. Do i need new gaskets or anything as well? Do any of our sponsors sell block off plates?
-
11-30-2007, 05:33 PM #7
- Join Date
- May 2007
- Location
- houston
- Posts
- 130
black- 2001 z28
if you want to keep your stock coolant line then you need to grind the ribs a little. you can put block offs on the back with an ls6 line on the front, or you could put an ls6 line on the front and back. i would change the gaskets, dont want to chance an air leak. someone should have an egr block off plate.
-
11-30-2007, 06:52 PM #8
Speed Inc sells block off plates for a few dollars. Non issue. The intake gaskets on an 04 should be fine. No need to change.
-
11-30-2007, 07:49 PM #9
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BBK SSI Intake, vs Holley Intake, vs LS6 intake, vs PP 96mm
By Lunatikgixxer in forum External EngineReplies: 26Last Post: 02-28-2017, 10:39 AM -
Question: HOW TO: Swap stock intake with LS6 intake
By thechad125 in forum General HelpReplies: 18Last Post: 02-26-2013, 03:17 AM -
LS6 intake manifold and 227 Intake runners
By IT_SS in forum Internal EngineReplies: 4Last Post: 07-07-2009, 02:11 PM -
Single Plane Intake VS Stock PP Intake
By xzaero0 in forum Forced InductionReplies: 1Last Post: 11-27-2007, 07:00 PM -
Difference in Stock Ram Air intake and other aftermarket intake
By WS6-cobra killer in forum Firebird / WS6Replies: 5Last Post: 01-15-2007, 06:47 AM
Bookmarks