This is a discussion on ignition packs? within the External Engine forums, part of the LSx Technical Help Section category; do they have a particular order which they must sit, reason i ask is i went from a perimeter bolt ...
08-01-2008, 05:08 PM #1
do they have a particular order which they must sit, reason i ask is i went from a perimeter bolt valve cover to a centerbolt and im wondering if that can be causing the surge and causing the car to turn off
08-01-2008, 06:49 PM #2
Where they are bolted doesnt matter, a coil pack is a coil pack, the computer doesnt know the difference. As long as you have the correct harness going to the correct pack then the correct wire going to the correct plug then you should be fine...
J2001 SS, Its not the car its the Driver that matters....
08-01-2008, 07:14 PM #3
that just might be it the plugs might be crossed, but then that should throw a code no codes though
08-02-2008, 03:06 AM #4
They are numbered... 1/8 , which is either # 1 or # 8... Depending on which side you're on.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By myk02k in forum External EngineReplies: 110Last Post: 10-01-2016, 05:41 PM
By Matt@HSW in forum NitrousReplies: 12Last Post: 03-29-2011, 05:59 PM
By slims00ls1z28 in forum GTOReplies: 36Last Post: 07-24-2009, 08:37 AM
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 12-07-2007, 07:20 PM
By secondgearscratch in forum External EngineReplies: 2Last Post: 05-04-2007, 01:01 PM