Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Oct 2005
    Location
    On the internet
    Posts
    41

    Fast Toys 104mm Lid --- Preorder now!

    The production 104mm Fast Toys air lids are on their way to us! We just have a limited production on the first batch so if you want one, order now. You will not be charged until they are shipped. We are expecting to have them ready to ship in a week.

    You can view the product, pictures and pricing in our online catalog:

    http://fasttoys.net/shop/product_inf...oducts_id=1704

    A clear version is also available but we do not have pictures of it yet. It will look exactly the same as our 98mm Clear Air Lid.

    The 104mm Lid will allow the TSP 100mm MAF to push right into our lip with no adapter required.

    The Lingenfelter 100mm MAF is about 2mm smaller on the body so it will require either a couple of wraps or electrical tape or some 1/8" thin foam adhesive weather stripping on the body to give e snug fit in our air lid.

    Thanks!
    Fast Toys Performance Parts
    Low pricing & honest customer service since 1998!

    Email:sales@fasttoys.net
    Web: www.fasttoys.net



  2. #2
    Junior Member
    Join Date
    Oct 2005
    Location
    On the internet
    Posts
    41

    104mm Clear or Black Lids Now Available!

    We have filled all the preorders and have some extra clear and black 104mm lids. Once this batch is done, it will be about a week before we have more.

    Get yours now

    You can place your order online or call us at 877-955-4896. Thanks!

  3. #3
    Senior Member karpetcm's Avatar
    Join Date
    Oct 2008
    Location
    Tujunga, CA
    Posts
    1,646

    White
    01 Camaro 6speed

    Do you have to remove the screen of the maf since all your transfering is the actual maf sensor, not the housing or the screen since it would be to small for your 104mm lid and housing for the maf. Also does my computer need to be re tuned for the extra air and the bigger housing for the MAF which wont have the screen either. Sorry for the questions but want to know what im getting into.
    1993 Z28 M6: K&N Intake, 52mm TB, TB Bypass, No Cats, Exhaust Cutout, Flowmaster Muffler, 3.90 Gears, 160 Thermo, Tune, BMR Springs, Bilstein Shocks, 3 Point SFC,s & MGW Shifter.

  4. #4
    Senior Member 00z28bubba's Avatar
    Join Date
    Dec 2007
    Location
    las vegas, nv
    Age
    36
    Posts
    1,389

    white
    2000 Z28

    Quote Originally Posted by karpetcm View Post
    Do you have to remove the screen of the maf since all your transfering is the actual maf sensor, not the housing or the screen since it would be to small for your 104mm lid and housing for the maf. Also does my computer need to be re tuned for the extra air and the bigger housing for the MAF which wont have the screen either. Sorry for the questions but want to know what im getting into.
    any aftermarket maf would need a tune for sure

  5. #5
    Sold: LS1 '85 El Camino ls1camino's Avatar
    Join Date
    Dec 2005
    Location
    Laurel, Maryland
    Posts
    4,975

    2000 Grand Prix GTP
    2000 Trans Am WS6 M6

    Quote Originally Posted by karpetcm View Post
    Do you have to remove the screen of the maf since all your transfering is the actual maf sensor, not the housing or the screen since it would be to small for your 104mm lid and housing for the maf. Also does my computer need to be re tuned for the extra air and the bigger housing for the MAF which wont have the screen either. Sorry for the questions but want to know what im getting into.
    New Mafs come with new ends, cause if you think about it...what is the point of getting a 100mm MAF if you're going to use the 78mm stock housings...kinda defeats the purpose. Also, I wouldn't get a 100mm MAF unless you're running a FAST 90/90 or 92/92. Stocker or Speed Density Tune is fine for average street cars (300-500hp).

  6. #6
    Senior Member karpetcm's Avatar
    Join Date
    Oct 2008
    Location
    Tujunga, CA
    Posts
    1,646

    White
    01 Camaro 6speed

    Ok cool, thanks ls1camino, 00z28bubba.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wanted: Fast Toys Black 104mm LS1 High Flow Air Lids
    By 1slowbusa in forum Parts Wanted / Trade
    Replies: 2
    Last Post: 04-27-2012, 01:59 PM
  2. Fast Toys!
    By blackSS01 in forum Sponsor Feedback
    Replies: 0
    Last Post: 05-12-2010, 10:09 PM
  3. SLP vs. Fast Toys CAI
    By x10-wakerider in forum External Engine
    Replies: 11
    Last Post: 06-30-2006, 12:16 PM
  4. Fast Toys Ram Air
    By TheKitchenSink in forum General Help
    Replies: 8
    Last Post: 04-07-2006, 07:07 AM
  5. Fast Toys Ram Air
    By Joe K. 99 Zeee!! in forum Parts Review
    Replies: 2
    Last Post: 11-21-2005, 05:31 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •