Results 1 to 12 of 12

engine wiring harness

This is a discussion on engine wiring harness within the External Engine forums, part of the LSx Technical Help Section category; i want to replace my harness. any suggestion on what to by and where to buy it would be appreciated. ...

  1. #1
    Junior Member
    Join Date
    Mar 2011
    Location
    fort myers,fl
    Age
    68
    Posts
    82

    black
    1998 trans am convertible

    engine wiring harness

    i want to replace my harness. any suggestion on what to by and where to buy it would be appreciated. anyone had any dealings with my-efi.com? they make a new harness from your old one.

  2. #2
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,747

    Navy Blue Metallic
    98 T/A w/a little mods...

    engine wiring harness

    Painless performance. All new harness & connectors. You can even customize it.
    http://www.ls1.com/forums/f7/my-6-liter-build-174257/

    http://www.ls1.com/forums/f8/my-8-8-rear-build-165553/

    6.0L Block - Forged 403 built, breaking it in , Polluter Stg3 Cam, FAST 102mm Intake, NW102 TB, MSD wires, NGK TR6 plugs, Truck Coil Packs, LS3 Fuel Injectors, CC Pacesetter LT Headers, TS&P ORY, QTP e-Cutout, Magnaflow Muffler, 104mm Air Lid & Line Lock, Catch Can, Stage 2 T56 w/Viper shaft, PRO 5.0 Shifter, Tick MC, Monster Stg 4 Clutch, QT SFI BH, MWC DSL, UMI: SFC, PHB, LCA's, LCA Relocation Brackets & TA, Hotchkis Springs (1" Drop), YR1 Snowflake Wheels wrapped in NT555 tires & Custom Fab Ford 8.8 rear w/4.10 Yukon Gears, WSQ Hood, 3"CM Strange Eng Drive Shaft.

    Horsepower never lies, but is often lied about!

  3. #3
    Junior Member
    Join Date
    Mar 2011
    Location
    fort myers,fl
    Age
    68
    Posts
    82

    black
    1998 trans am convertible

    THANKS Will check it out

  4. #4
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,747

    Navy Blue Metallic
    98 T/A w/a little mods...

    engine wiring harness

    just warning you. They go around $600

  5. #5
    Now in Summit LT1 Flavor! Y2KArcticSS's Avatar
    Join Date
    Mar 2007
    Location
    Henryetta/Tulsa Oklahoma
    Age
    33
    Posts
    3,509

    2016 Camaro SS - Summit
    2001 Trans Am WS6 - NBM

    I second Painless. I have a friend who got one for his 355 build in his 84 shortwide, and my brother got one for his 5.3 LS swap in his 67 C10. Both were somewhat.....painless.

    2016 Summit White 1SS - The DD
    2001 NBM Trans Am WS6 - Torquer V2 cam, Yank 3000 stall, Transgo kit, Racetronix fuel pump, TSP LTs, Magnaflow catback, 17x9.5/17x11 TTII's
    2000 Arctic White SS #1667 - Sold

  6. #6
    Junior Member
    Join Date
    Mar 2011
    Location
    fort myers,fl
    Age
    68
    Posts
    82

    black
    1998 trans am convertible

    looking at painless site it seems that pn 10101 is the right choice but summit doesnt offer it. not looking to customize just want to replace existing one. just replaced every gasket,hose,plugs,ac,plugs,ps, alt,sensors, tranny,etc in the last month. all thats left is injectors [suggestions?] but want to change harness first. mechanic says he can get good use harness but i don't know.

  7. #7
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,747

    Navy Blue Metallic
    98 T/A w/a little mods...

    Unless you're bumping up in mods/hp then the stock injectors are fine.


    Summit is listed as a vendor.


    You may need to call them and ask. I've had to do that a couple of times and they had what I was looking for but for some reason not on the site.

    Dealer Locator | Painless Performance

  8. #8
    Junior Member
    Join Date
    Mar 2011
    Location
    fort myers,fl
    Age
    68
    Posts
    82

    black
    1998 trans am convertible

    THANKS. summit doesn't carry this model on there website. i'm assuming that from what iread that this is the harness for my car?

  9. #9
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,747

    Navy Blue Metallic
    98 T/A w/a little mods...

    Is this for the 98 Trans Am?

    If so you need to look for PN 60508 06 60509. The difference is extra wire length for the injectors.


    https://www.summitracing.com/parts/prf-60508

  10. #10
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,747

    Navy Blue Metallic
    98 T/A w/a little mods...

    Now my only concern is you need to find out if the harness is made specific for the 98.


    98's have a different harness and ecm then 99-02. The 99-00 had a specific ecm and the 01-02's had a slightly different ecm over the 99-00.

  11. #11
    Junior Member
    Join Date
    Mar 2011
    Location
    fort myers,fl
    Age
    68
    Posts
    82

    black
    1998 trans am convertible

    WILL check it out. is extra length necessary? had two injectors replace this month the rest are the ones that came with the car. they have 275k miles on them. is there a life expectancy on these?. would it be advisable to change these at the same time i change harness or just replace them when they fail/ thanks as always for your input.

  12. #12
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,747

    Navy Blue Metallic
    98 T/A w/a little mods...

    Length - not really.

    Injectors - it may be time to have them cleaned up and serviced. I found a shop that bench tested mine, cleaned and replaced any potential faulty internals for about $25 per injector. There are places online that do it but they were about $35-50 per injector. Injectors are kinda in the category of if it isn't broke don't fix. A good injector cleaner will go a long way as well as quality 91/93 octane gas.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB engine wiring harness
    By PhilipG in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 01-05-2008, 12:01 PM
  2. Engine Wiring Harness
    By fwellingtonfiii in forum General Help
    Replies: 1
    Last Post: 07-17-2007, 03:28 PM
  3. WTB: 98 LS1 Engine Wiring Harness
    By Phantomhp in forum Parts Wanted / Trade
    Replies: 1
    Last Post: 06-20-2007, 02:57 PM
  4. WTB 98-02 Engine wiring harness
    By DreamLS1 in forum Parts Wanted / Trade
    Replies: 1
    Last Post: 03-07-2007, 08:24 AM
  5. WTB: Engine wiring harness and pcm
    By GeneralIII in forum Parts Wanted / Trade
    Replies: 1
    Last Post: 03-04-2006, 08:52 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •