Results 1 to 11 of 11

with egr provisions

This is a discussion on with egr provisions within the External Engine forums, part of the LSx Technical Help Section category; Hey everyone I read on here somewhere that there is actually a way to install the egr tube back into ...

  1. #1
    Senior Member clg82's Avatar
    Join Date
    Feb 2007
    Location
    California
    Age
    35
    Posts
    2,453
    2000 Trans Am

    with egr provisions

    Hey everyone I read on here somewhere that there is actually a way to install the egr tube back into my ls6 intake with some kind of an egr provision. I read somewhere that lingenfelter sells one, or did but I can't find any information on it. Anyone with some suggestions would be greatly appreciated.....~Chris
    2000 Arctic White trans am, ws6 hood, ws6 air box, slp lid, slp smooth bellows, slp loudmouth exhaust,shift kit, rebuilt trans, LS6 intake, 3.73 gears, Shaner S3 p/p throttle body, and a tune . SFC. C6 ZO6 rims 18" in back 17" in front. Drilled and slotted rotors.

  2. #2
    Junior Member
    Join Date
    Jun 2009
    Location
    Andorra
    Posts
    9
    DoHaless

    with egr provisions

    you could clean out your intake and then disconnect the vaccuum line to the EGR valve. Itll throw a code for a while, but Ive heard that itll go away

  3. #3
    Impounded
    Join Date
    Oct 2007
    Location
    Beaver Dam KY
    Posts
    7,746

    79 T/A -91 Firebird
    1998 Trans Am -Oynx Black

    Quote Originally Posted by DoHaless View Post
    you could clean out your intake and then disconnect the vaccuum line to the EGR valve. Itll throw a code for a while, but Ive heard that itll go away
    Wat?

    Most likely your going to have to buy a slp ls6 intake.

  4. #4
    Senior Member clg82's Avatar
    Join Date
    Feb 2007
    Location
    California
    Age
    35
    Posts
    2,453
    2000 Trans Am

    Quote Originally Posted by JoshieDoom View Post
    Wat?

    Most likely your going to have to buy a slp ls6 intake.
    I'm going to drill a hole into the top of the intake where the ls1 was located, then going to seal it. It should work out.

  5. #5
    Impounded
    Join Date
    Oct 2007
    Location
    Beaver Dam KY
    Posts
    7,746

    79 T/A -91 Firebird
    1998 Trans Am -Oynx Black

    Quote Originally Posted by clg82 View Post
    I'm going to drill a hole into the top of the intake where the ls1 was located, then going to seal it. It should work out.
    It should technically work, but for a few bucks more you could sell the ls6 intake before molesting it and get one with EGR for about the same price.

  6. #6
    Senior Member clg82's Avatar
    Join Date
    Feb 2007
    Location
    California
    Age
    35
    Posts
    2,453
    2000 Trans Am

    Quote Originally Posted by JoshieDoom View Post
    It should technically work, but for a few bucks more you could sell the ls6 intake before molesting it and get one with EGR for about the same price.
    LOL I need it done by friday that is my deadline for my smog. I also called slp because they modify the ls6 intake for egr and all they basically use is a pressure fitting and some epoxy to get it to seal so I should be good. I am doing it tonight after work so I will let you know how things end up.....

  7. #7
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    Quote Originally Posted by JoshieDoom View Post
    It should technically work, but for a few bucks more you could sell the ls6 intake before molesting it and get one with EGR for about the same price.
    I don't know about that, last time I looked on SLPs site, the LS6 with EGR provision was selling for $475 range. No chance in hell anyone is gonna pay much more than $300-350 range for a used LS6 intake.

  8. #8
    Senior Member 00LS12LS6Z28's Avatar
    Join Date
    Jul 2007
    Location
    Bristow, VA
    Posts
    663

    Black
    2000 Camaro Z28 (sold)

    Lingenfelter sold it for $50, but I can't find it on their site. It is possible that it is a discontinued item.

  9. #9
    Senior Member clg82's Avatar
    Join Date
    Feb 2007
    Location
    California
    Age
    35
    Posts
    2,453
    2000 Trans Am

    Ok guys here is what i decided to do let me know what you think. I reinstalled all of the egr hardware, except I didnt plumb into the intake. I just let the tube set on top of where the egr origianally went so it looks like it plummed, everything looks STOCK AND FACTORY. What are the chances of me not passing now. Since I don't know if they do a egr functional test (unless someone can correct me) i think it should work out........thoughts please.......................

  10. #10
    Just me Y2KPewterSS's Avatar
    Join Date
    Nov 2006
    Location
    Broken Arrow, OK
    Age
    42
    Posts
    23,353

    Pewter metallic
    2000 Camaro SS

    http://ls1.com/forums/member.php?u=328

    Shoot him a PM, he is going to be able to give you the BEST answer.

  11. #11
    Senior Member clg82's Avatar
    Join Date
    Feb 2007
    Location
    California
    Age
    35
    Posts
    2,453
    2000 Trans Am

    ***Update***

    Hey everyone well all of the worrying I did about the egr, for the visual, as well as the sniffer was too much! I PASSED WITH FLYING COLORS!!! Now I can sleep easily tonight! Thank you everyone who put in the time to answer all of my threads about this~Chris

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Help: need backing plates with sensor provisions
    By transampete in forum Eastern Members
    Replies: 0
    Last Post: 04-03-2009, 06:38 AM
  2. header provisions
    By blackbird99 in forum External Engine
    Replies: 5
    Last Post: 01-01-2008, 07:59 PM
  3. Lt1 Stock Rubber Intake Elbow w/ Vented Optispark Provisions
    By Marc1130 in forum Parts For Sale / Trade
    Replies: 3
    Last Post: 08-10-2006, 05:58 PM
  4. Provisions make reporting on government surveillance illegal
    By CaptainCaveMan in forum Political / Debate Forum
    Replies: 1
    Last Post: 03-11-2006, 05:54 PM
  5. EGR Provisions on LS6 Manifold
    By LS1Power06 in forum External Engine
    Replies: 11
    Last Post: 12-06-2005, 12:03 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •