Crank pully bolt HELP!!!

**V666** · 10-16-2008, 12:46 PM

I am having a hell of a time getting it loose!! Any one have a trick. Please tell me its not reverse thread.

**bills98ta** · 10-16-2008, 03:21 PM

Regular threads... Try a 1/2" air gun ?

**V666** · 10-16-2008, 03:31 PM

Tried that won't budge. tried breaker bar, tried hitting breaker bar to jolt it free still no good. At least now I know its a regular thread direction. so at least that is ruled out. Thank you

**Wesman** · 10-16-2008, 04:44 PM

So you're standing on the crank pully bolt with a 1/2" drive impact gun and its not budging?? Wow, I don't know what to say to that...

**V666** · 10-16-2008, 04:59 PM

I have a few choice words to say to that!!!!

**bills98ta** · 10-16-2008, 05:08 PM

Are you sure the 1/2" gun isn't weak... Try some lug nuts to test it...

**V666** · 10-16-2008, 05:16 PM

I never thought of that. I'll let you know thanks

**bills98ta** · 10-16-2008, 06:08 PM

Unhook the air line and spray a little WD40 into the gun, then try it !!!

**V666** · 10-16-2008, 06:21 PM

Will do

**0rion** · 10-19-2008, 05:23 AM

breaker bar with 4ft of pipe and put some ass behind it.

**V666** · 10-19-2008, 01:26 PM

Breaker bar and ass works everytime.

I was scared to do that at first in case it was reverse threads. Thanks for all the help.

**crazy dave ls1** · 10-19-2008, 04:32 PM

Originally Posted by V666

I am having a hell of a time getting it loose!! Any one have a trick. Please tell me its not reverse thread.

you can also carefully use a breaker bar and rest it against the drivers side fenderwell/frame area and bump the starter.oh yea disable the coils first.