Page 2 of 2 FirstFirst 12
Results 21 to 29 of 29

Corsa clone tips question

This is a discussion on Corsa clone tips question within the External Engine forums, part of the LSx Technical Help Section category; Originally Posted by M-Ten Oh and I got these mufflers : http://store.summitracing.com/partde...&autoview=sku= Shipped out on wednesday, got here today.. not ...

  1. #21
    Senior Member GULLETT17's Avatar
    Join Date
    Oct 2007
    Location
    Muncie, IN
    Posts
    2,554

    00 TA PWTR, 98 VertTA NBM
    80 TA BLK, 80 Formula NBM

    Quote Originally Posted by M-Ten View Post
    Oh and I got these mufflers :

    http://store.summitracing.com/partde...&autoview=sku=

    Shipped out on wednesday, got here today.. not bad
    hell yeah those aint too bad on price either

  2. #22
    Senior Member M-Ten's Avatar
    Join Date
    Jun 2007
    Location
    St. Pete, Florida
    Age
    27
    Posts
    2,210

    Silver+Black/Black+Silver
    1999 TA M6/03 GSXR 600

    Yeah I know

    The guy orginally told me they would fit on any muffler, They're meant for 2.5", I ordered the 3" magnaflow in/out. I brought it to my exhaust guy to make sure he would be able to get them on.. It would require a little cutting of the tip but he'll be able to make it work.

  3. #23
    down with the lot lizards blackhawk01's Avatar
    Join Date
    Dec 2006
    Location
    Pensacola
    Age
    28
    Posts
    1,565

    Red
    2001 Camaro SS A4

    *subscribes* for the link..probably going to buy these later..they do look good

  4. #24
    Senior Member GULLETT17's Avatar
    Join Date
    Oct 2007
    Location
    Muncie, IN
    Posts
    2,554

    00 TA PWTR, 98 VertTA NBM
    80 TA BLK, 80 Formula NBM

    Quote Originally Posted by M-Ten View Post
    Yeah I know

    The guy orginally told me they would fit on any muffler, They're meant for 2.5", I ordered the 3" magnaflow in/out. I brought it to my exhaust guy to make sure he would be able to get them on.. It would require a little cutting of the tip but he'll be able to make it work.
    oh ok so your puttin your mufflers after the rear axle and tips directly welded to them . . . yeah im sure he'll get it to work. . .
    i was suggesting the ulta flow x assuming it would be more toward the front of the car, but i dont know what the clearance issues would be

  5. #25
    Senior Member GULLETT17's Avatar
    Join Date
    Oct 2007
    Location
    Muncie, IN
    Posts
    2,554

    00 TA PWTR, 98 VertTA NBM
    80 TA BLK, 80 Formula NBM

    hey MTen . . what do you think about the quad tip magnaflow catback i think i cant get a pretty good deal on it . . . bout 500 bucks free shipping? what do you think about the tips compaired to the corsa?

  6. #26
    Senior Member M-Ten's Avatar
    Join Date
    Jun 2007
    Location
    St. Pete, Florida
    Age
    27
    Posts
    2,210

    Silver+Black/Black+Silver
    1999 TA M6/03 GSXR 600

    I looked at the magnaflow mufflers and I don't think the tips will look nearly as good.. Some of the tips are just too big, but mainly they have that gap in between them and IMO it doesn't look as nice as these tips..

    Plus it also depends on what kind of exhaust set up you're planning on doing.. if you go w/ the magnaflow catback it's a Y pipe obviously.. I'm doing an X pipe so my options are a little different..

    As far as price goes $500 plus free shipping isn't that bad
    Last edited by M-Ten; 01-02-2008 at 09:55 AM.

  7. #27
    Senior Member M-Ten's Avatar
    Join Date
    Jun 2007
    Location
    St. Pete, Florida
    Age
    27
    Posts
    2,210

    Silver+Black/Black+Silver
    1999 TA M6/03 GSXR 600

    Well actually, now that I think about it.. I bought my tips for $110 after shipping, the mufflers came to around $155 after shipping, so we're at $265 there..

    Now after everything, 3" mandrel bent X pipe ran over the axle, mufflers/tips put on, plus labor, my exhaust guy is only charging me $300 ..

    So I'm looking at around $565 for that set up. But obviously I'm getting a great deal from my exhaust guy, so in reality I'd say yeah that's a pretty good deal for that cat back, but you might wanna look into gettin some true duals, might be a little trickier than a pre-made Y pipe, but you'll gain more power and probably sound better too

    I also got the QTP headers for around $700 and I'm paying a friend of mine a couple hundred to help me install them in about a week.. so ~ $1400 for the whole set up.

  8. #28
    Senior Member GULLETT17's Avatar
    Join Date
    Oct 2007
    Location
    Muncie, IN
    Posts
    2,554

    00 TA PWTR, 98 VertTA NBM
    80 TA BLK, 80 Formula NBM

    welp i bought it . . couldn't pass it up. They usually go for around 700 not shipped and I got it for 496 with free shipping. The tips looked pretty damn close to the corsa tips but yes they are a half inch bigger. I've heard many many people on here talk up the magnaflow catback so i think it was good deal. I was definately leanin towards true duals but this is guaranteed to fit almost perfect and it wont have clearance issues.
    Definately let me know how yours turns out and get some pics up when you get her on and I'll do the same!

  9. #29
    Senior Member M-Ten's Avatar
    Join Date
    Jun 2007
    Location
    St. Pete, Florida
    Age
    27
    Posts
    2,210

    Silver+Black/Black+Silver
    1999 TA M6/03 GSXR 600

    Yeah it was a good deal, magnaflow is always a good choice

    I just personally prefer true duals over a y pipe..

    Anyway gl with your set up man.. I'll make a post in the next couple of weeks when I get everything done

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4' Corsa Clone Tips
    By karpetcm in forum Parts For Sale / Trade
    Replies: 4
    Last Post: 04-20-2016, 07:22 PM
  2. Corsa clone tips
    By nichoLaS1 in forum External Engine
    Replies: 12
    Last Post: 12-03-2010, 04:41 PM
  3. WTB Corsa/clone tips
    By taram118 in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 08-05-2008, 02:22 PM
  4. For Sale: Corsa Clone Tips
    By SandmanWs7 in forum Parts For Sale / Trade
    Replies: 20
    Last Post: 03-05-2008, 10:08 PM
  5. Corsa clone tips, flowmaster
    By LukesSpeedShop in forum Parts For Sale / Trade
    Replies: 5
    Last Post: 01-31-2008, 05:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •