Page 7 of 8 FirstFirst ... 345678 LastLast
Results 121 to 140 of 152

Best headers, best catback, soundclips etc.

This is a discussion on Best headers, best catback, soundclips etc. within the External Engine forums, part of the LSx Technical Help Section category; I have a bit more ground clearance with my obx lts and catted y pipe. I believe at the lowest ...

  1. #121
    Moderator 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Fairfax, VA
    Posts
    3,596

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    I have a bit more ground clearance with my obx lts and catted y pipe. I believe at the lowest point I can fit a coke can under it.

  2. #122
    Moderator Cutlass's Avatar
    Join Date
    Apr 2008
    Location
    Madison, WI
    Posts
    6,998

    1999 Formula WS6 M6-sold
    2001 Silverado Z71

    The only way to find out is to try it and take a pic.

  3. #123
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    cutlass is you car lowered?

    Does anyone has a pic of BBK headers with ORY, borla adjustable clearance? and a sound clip? Thanks.
    Last edited by JayTA98; 07-25-2011 at 06:20 PM.

  4. #124
    Moderator Cutlass's Avatar
    Join Date
    Apr 2008
    Location
    Madison, WI
    Posts
    6,998

    1999 Formula WS6 M6-sold
    2001 Silverado Z71

    My car is not lowered. Its the stock WS6 suspension.

  5. #125
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    Quote Originally Posted by Cutlass View Post
    My car is not lowered. Its the stock WS6 suspension.
    okay thanks. My is lowered in the front so Ithink that might be an issue. i guess there is only one way to find out.

  6. #126
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,466

    Red
    02 35th LE Camaro SS

    Jay, mine is lowered on Strano's. I have a pic of my ground clearance somewhere. I'll try to locate it for you.

  7. #127

  8. #128
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,466

    Red
    02 35th LE Camaro SS

    Those are 1-7/8" Kooks with the 3" ORY. I don't think BBK's would be too different.

  9. #129
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    Quote Originally Posted by 35th-ANV-SS View Post
    Those are 1-7/8" Kooks with the 3" ORY. I don't think BBK's would be too different.
    Thanks 35th

  10. #130
    Visualize°Design°Create SSwt00SS's Avatar
    Join Date
    Dec 2005
    Location
    Dallas, TX
    Posts
    9,287

    '12 Silver SS 1SS
    '00 Black SS #8617

    Jay, mine is lowered with the Eibach Pro-kit. I took these for Cutlass and then forgot which thread to post it in...

    Cutlass hooked me up



  11. #131
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    Quote Originally Posted by SSwt00SS View Post
    Jay, mine is lowered with the Eibach Pro-kit. I took these for Cutlass and then forgot which thread to post it in...

    Cutlass hooked me up

    Click for full size
    Click for full size
    yeah thats too low for the streets of orlando lol. Thanks for the pics.

  12. #132
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,466

    Red
    02 35th LE Camaro SS

    If it helps any, I've had my exhaust set-up on my car a few years now. I've been lowered for 2 years almost. I've never once scrapped. Going over large speed bumps, up heavy inclined drive-ways, etc.

  13. #133
    Senior Member JayTA98's Avatar
    Join Date
    Dec 2007
    Location
    Orlando, FL
    Posts
    3,351

    Mean Black
    1998 Trans Am

    http://orlando.craigslist.org/pts/2478884113.html

    I just saw them in craigslist. I wonder if it will be a better deal that the BBK headers with ORY from summit. Thanks.

  14. #134
    Junior Member bluonblk99's Avatar
    Join Date
    Apr 2010
    Location
    cincinnati
    Age
    29
    Posts
    86

    black/viper blue
    99 WS6 M6

    i have the borla 3" adjustable with pace setter lts and with the ofy and eibach sportline springs it drags any and every speed bump without goosing it over. even when running 60 or so up a steep hill the exhaust drags. it sounds pretty rough. but it looks good lowered
    Last edited by bluonblk99; 10-06-2011 at 07:42 PM.

  15. #135
    Senior Member tatertot91's Avatar
    Join Date
    Oct 2008
    Location
    Coral Springs, Fl
    Posts
    5,773

    Sunset Orange Metalic
    2001 Camaro SS

    Wanted a good clip for exhaust purposes
    Been playing around with the gopro a lot


  16. #136
    Junior Member
    Join Date
    Nov 2010
    Location
    San Francisco
    Age
    28
    Posts
    21

    black
    1998 ss camaro

    Is there anyway we can get a sound clip of this setup, this is exactly what i am trying do with my SS, And what was the out come power wise?
    Quote Originally Posted by Mike0202 View Post
    Headers: Pacesetter Long Tubes

    Y/X/H-pipe: Texas Speed Catted Y

    Catback: SLP Loudmouth 1

    This really is my new favorite set up. Before the install I was alittle worried that it was going to be too loud but to my surprise its perfect. On a cold start its pretty loud, but nothing crazy. The idle is perfect with a nice medium tone. Under normal driving conditions the car has a nice deep tone. With alittle gas the car roars like a lion. Oh I almost forgot. Wide open throttle is just down right nasty.

  17. #137
    Member blackcar's Avatar
    Join Date
    Oct 2005
    Location
    Arkansas
    Posts
    1,234

    2000 Camaro SS
    '02 Z28 parting-out

    Quote Originally Posted by SSwt00SS View Post
    Jay, mine is lowered with the Eibach Pro-kit. I took these for Cutlass and then forgot which thread to post it in...

    Cutlass hooked me up

    Click for full size
    Click for full size

    What's your setup??

  18. #138
    Junior Member
    Join Date
    Oct 2010
    Location
    Canada
    Posts
    11

    Black
    99 Trans Am

    Hi,just a question(possibly a stupid one)but I have a 99 Camaro SS.It appears to have a stock system,but it also appears to have a 3 inch Y and cat back.The muffler has two outlets on the left side.Is this a factory upgrade?I have heard that the SS came with an SLP exaust from the factory.but I don't know if this is right.Any thoughts on this?Thanks.

  19. #139
    Moderator Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,552
    Quote Originally Posted by BR427 View Post
    Hi,just a question(possibly a stupid one)but I have a 99 Camaro SS.It appears to have a stock system,but it also appears to have a 3 inch Y and cat back.The muffler has two outlets on the left side.Is this a factory upgrade?I have heard that the SS came with an SLP exaust from the factory.but I don't know if this is right.Any thoughts on this?Thanks.
    Yep that would be a factory SLP, what they called "two out the left" setup. Works great. A 99 model would have still used this if the option was checked. In 2000 SLP used the same I-pipe and muffler but changed the outlets to a dual setup (so the muffler is slightly different for tailpipe reasons) and instead had tailpipes to simulate a dual system and had dual tips on each side,,,hence the term "dual dual" for this system.

    Both versions of the system work as well as any 3" catback on the market, and actually it is said that the "two out the left" setup actually flows a tad better than the later "dual dual" system.

  20. #140
    Senior Member tatertot91's Avatar
    Join Date
    Oct 2008
    Location
    Coral Springs, Fl
    Posts
    5,773

    Sunset Orange Metalic
    2001 Camaro SS

    Quote Originally Posted by BR427 View Post
    Hi,just a question(possibly a stupid one)but I have a 99 Camaro SS.It appears to have a stock system,but it also appears to have a 3 inch Y and cat back.The muffler has two outlets on the left side.Is this a factory upgrade?I have heard that the SS came with an SLP exaust from the factory.but I don't know if this is right.Any thoughts on this?Thanks.
    You have whats called a 2OTL or two on the left exhaust
    It's a nice system

Page 7 of 8 FirstFirst ... 345678 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Headers, ORY, Catback w/ E-Cutout
    By ls1camino in forum Parts For Sale / Trade
    Replies: 10
    Last Post: 03-30-2009, 04:56 PM
  2. WTT Magnaflow Catback + TSP ORY for TDs or headers
    By Zaccagnini in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 09-15-2008, 11:44 AM
  3. put my catback on today, need help with headers
    By jd1666 in forum External Engine
    Replies: 4
    Last Post: 08-12-2008, 08:20 PM
  4. Wanted: WTT set of headers for your catback
    By Qwk94Z28 in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 07-20-2008, 10:24 AM
  5. Magnaflow cb soundclips
    By Paul Hardwick in forum External Engine
    Replies: 3
    Last Post: 04-04-2006, 04:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •