Results 1 to 12 of 12
-
07-03-2012, 09:45 PM #1
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
AMW catch can install .....in pics
Since my LS6 valley cover install I have been wondering if adding a catch can would make that part even better.....so I pulled the trigger and got a Accurate Machine Works catch can.....this thing is a work of art......the can and the bracket......not a cheap china bay part by no means.....I will give it a few hundred miles and see what it does......follow along
- - - Updated - - -
nice n shiny...you can get it in a few colors
-
07-03-2012, 09:47 PM #2
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
the inlet has metal mesh to congregate the oil mist
-
07-03-2012, 09:48 PM #3
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
the body has a O ring at the top for a good seal
- - - Updated - - -
and a easy drain
-
07-03-2012, 09:49 PM #4
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
the separate LS install bracket is easy to put together
- - - Updated - - -
-
07-03-2012, 09:51 PM #5
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
the kit comes COMPLETE.....did not have to go out looking for bolts or hoses or.......
- - - Updated - - -
- - - Updated - - -
-
07-03-2012, 09:53 PM #6
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
all done !
- - - Updated - - -
-
07-03-2012, 09:54 PM #7
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
the kit has nice stainless button head bolts
-
07-03-2012, 10:45 PM #8
Looks good. Easy clean install. Let us know how you like it.
-
07-04-2012, 07:14 AM #9
Looks alot like mine but with a fancy bracket setup.
I think you'll find it will still catch some oil even with the LS6 PCV setup so it's probably a good addition. At least that's what others have reported.
-
07-04-2012, 08:56 AM #10
- Join Date
- Jun 2011
- Location
- Branchville, NJ
- Posts
- 3,111
Silver & Blue- 02 Camaro SS, 04 GTO
I like the clean factory look. How muh is it ?
My ride is a 2002 Camaro SS SLP #3296 with 30k, LTH, 3" Y, CME, Frost tune, K&N, ported TB, Blackwing lid, Bellows, MSD, Denso Iridium, and 85mm MAF, Bilsteins, Eibach springs, SLP strut brace, Adj. Panhard, TA Girdle, UMI, Pro 5.0, Nitto NT555
My wife has a 2004 GTO with the rare SAP, 18" wheels, K&N Cold Air System, MSD, Ported TB, Frost tune, Denso Iridium, Flowmaster cat-back, 3200 Yank, 75k
-
07-04-2012, 09:54 AM #11
- Join Date
- Jan 2010
- Location
- texas
- Posts
- 1,623
silver- 2000 formula
it was NOT cheap !!!
-
07-06-2012, 07:17 AM #12
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Anyone have pics of the inside of WSstore catch can
By brian r in forum General HelpReplies: 7Last Post: 02-08-2011, 07:11 AM -
catch can install
By Ramairgod84 in forum General HelpReplies: 6Last Post: 08-12-2010, 08:05 AM -
Catch can install ? Let me know if this is right
By brian r in forum General HelpReplies: 17Last Post: 07-16-2009, 11:28 AM -
Question: PCV Catch can emptied pics... is this ok?
By 666ws6 in forum General HelpReplies: 12Last Post: 07-07-2009, 03:27 AM -
catch can install question
By mvvette97 in forum External EngineReplies: 4Last Post: 09-15-2006, 09:56 AM
Bookmarks