This is a discussion on Alternator wire within the External Engine forums, part of the LSx Technical Help Section category; Long story short, car died so i pulled the battery and alt to have them tested, and i noticed that ...
06-07-2008, 08:26 PM #1
Long story short, car died so i pulled the battery and alt to have them tested, and i noticed that the plug for the alt was missing, i found one red wire comming out of the harness next the the injectors.
well after testing, the alt was still good but the battery was shot
and the guy told me that it should have the 4 pin connecter pluged in.
i found a new plug in the glove box of the car from the past owner(had the car for 2 months)
so it all falls to the new connecter has four gray wires. and i only found one red wire.
so can anyone tell me where that one wire goes on the connecter and what the other wires are needed and where they go on the connecter??
06-08-2008, 07:03 PM #2
not seeing it is tough, but how big is the 1 red wire? chances are its the charge back wire that charges your battery, hince why your battery died on you, it was running all your stuff for you. there should be a big stud coming out of the back of the alternator for it to bolt to. hope this helps
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)