02 AIR Removal
This is a discussion on 02 AIR Removal within the External Engine forums, part of the LSx Technical Help Section category; I'm going to remove the AIR system on my 02 SS, I've already had the CPU SES warnings removed. Has ...
09-20-2007, 06:25 AM #1
- Join Date
- Apr 2006
- Greenwood Indiana
- 2002 Camaro SS
02 AIR Removal
I'm going to remove the AIR system on my 02 SS, I've already had the CPU SES warnings removed. Has anybody done this on an 01-02? It's very hard to see the hose routing around the back of the engine but it looks like there is some type of vacuum switch back there. Any advice?
09-23-2007, 07:59 PM #2
i just did the same thing (minus the ses removal...it's friggin annoying me now lol). anyway, you gotta remove the whole unit/hoses from underneath the front drivers side compt of the car. then for the housing where the 3 hoses are running to on the drivers side by the firewall you gotta pull up really really hard. theres a clip that holds it down and it's impossible to try and pry off. if you pull up hard enough/wiggle the unit it will eventuall pop off. then there is a tiny vaccum line there that needs to be plugged. i just stuck it onto on the the screw heads on the closest coil pack bolt. it runs beautifully now.
09-25-2007, 05:32 AM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By gashkerwin in forum General HelpReplies: 63Last Post: 09-18-2009, 03:21 PM
By Firebirdjones in forum External EngineReplies: 10Last Post: 09-14-2007, 07:41 PM
By mrr23 in forum Computer & TuningReplies: 14Last Post: 04-09-2007, 10:57 AM
By danman in forum General HelpReplies: 4Last Post: 10-11-2006, 09:11 PM
By KM02SS in forum General HelpReplies: 5Last Post: 08-31-2006, 09:31 AM