Results 1 to 4 of 4

the build is almost done....

This is a discussion on the build is almost done.... within the Corvette forums, part of the Vehicle Specific category; Ok so I got the trick flow genx 515hp head, cam, rocker kit installed on the car, also crank underdrive ...

  1. #1
    Member MachWon's Avatar
    Join Date
    May 2009
    Location
    Bavaria, Germany
    Posts
    104

    pewter
    99 vette

    the build is almost done....

    Ok so I got the trick flow genx 515hp head, cam, rocker kit installed on the car, also crank underdrive pulley, ls6 ported oil pump, new lifters, pushrods, water pump, kooks 1 7/8" long tube headers, kooks catted 3" mid-pipe, FAST 92mm intake, LS2 90mm t/b, 85mm maf. The car pulls like a raped ape. Only problem is I am still running factory injectors and I am at 116% duty cycle at WOT. My buddy who is also my tuner has all the flow data tables on hand for LS7 injectors, so to make things easier I would like to get them. I just need the part number tried googling it but came up empty handed. If someone could point me in the right direction I would appreciate it. I would just go to the local GM dealership If I were in the states but I'm in Germany and need to order them online. thanks

  2. #2
    Corvette Moderator BlownC5's Avatar
    Join Date
    Sep 2005
    Location
    Essexville
    Posts
    464

    Velocity Yellow
    2006 E-Force blown Z06

    Sounds like a great setup. For your injectors, check out a set of 8 Bosch 0280155811 or 24508208 injectors. They came with the ATI Procharger kit and will support 530HP @ 80% duty cycle. Their flow rating is 36lb @ 43 PSI and 42lb @ 58 PSI. If you plan on modding even more in the future, you could go with some 42 green top SVO injectors. Good luck!
    2006 E-Force supercharged Z06

  3. #3
    Member
    Join Date
    Oct 2009
    Location
    Pensacola
    Posts
    174

    Red
    1998 Trans Am WS6


  4. #4
    Member MachWon's Avatar
    Join Date
    May 2009
    Location
    Bavaria, Germany
    Posts
    104

    pewter
    99 vette

    Well i bought some 37# racetronix injectors from texas speed but my tuner says they will complicate things when it comes to tuning as he doesnt have any of the flow tables for them. He already has them for gm injectors. Being in Germany limits the ease of tuning and places/people that can do it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 78 LS1 TA build
    By reedld in forum LSx Retrofit and Swap
    Replies: 6
    Last Post: 07-11-2014, 07:41 PM
  2. 440 LSX build
    By cam02ss in forum Camaro / SS
    Replies: 9
    Last Post: 07-01-2013, 04:55 AM
  3. 78 LS1 TA build
    By reedld in forum Classic Muscle
    Replies: 2
    Last Post: 04-23-2013, 08:40 PM
  4. Hot Rod Mag LS1 build
    By racingrev in forum Camaro / SS
    Replies: 2
    Last Post: 09-01-2010, 10:39 AM
  5. 500CI Chevy LS1 Engine Build - How To Build A 500C
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 02-17-2009, 08:10 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •