Results 1 to 12 of 12
Thread: Wire Harness Mod
-
05-22-2006, 10:52 AM #1Long DriveGuest
Wire Harness Mod
Completed same over the weekend. Took a little more than the 2.5 hours the write-up said, but that's just me! Thanks to whomever prepared the post from some time ago.
Also re-routed the air hose from the passenger side fender down by the engine and re-routed the hood release cable under the fender well, so I now have both wheel humps cleaned off. Looks good...all you see is engine and that, after all, is the whole point of the car in the first place!!
-
05-22-2006, 10:56 AM #2
- Join Date
- Aug 2005
- Location
- Commerce Ga
- Age
- 47
- Posts
- 4,994
Black, Blue- 07 TBSS, 07 GSXR1000
So when we gonna see some pics of this?
-
05-22-2006, 11:11 AM #3Long DriveGuest
Being computer-challenged, I never have been able to get a picture into a post.
Still needs some work on the humps because of the wire/cables leaving wear marks and I gotta get some plugs for all the freakin' holes!
-
05-22-2006, 11:23 AM #4Originally Posted by Long Drive
-
05-22-2006, 07:53 PM #5Long DriveGuest
Still not sure how to post a picture! I found plugs that fit the holes nicely and painted them Pewter. Now it looks finished. I could take a picture with my phone and send an email. I'll check your info and if there's an address, I'll give that a shot.
-
05-22-2006, 07:56 PM #6
wheres the write up on this?
-
05-23-2006, 06:41 PM #7Long DriveGuest
It was posted in '04 on the website prior to this one. If they archived stuff before they shut it down or whatever happened, you may find it by searching "wire mod" or something similar.
Be pleased to fax it to you if you email me your fax number!
-
05-23-2006, 07:02 PM #8Long DriveGuest
http://www.lswon.com/2005/01/25/wire-mod/
This is the exact article I used to do mine. Worked like a charm. Good luck!
-
05-23-2006, 07:08 PM #9
thanks ya'll
-
05-23-2006, 07:14 PM #10Long DriveGuest
I've attached five pix to this reply, but not sure how they go along...don't see any pix when I previewed the post. Here goes!
-
05-23-2006, 07:16 PM #11Long DriveGuest
How cool...I just learned something new. Anybody wanna see pix of our last trip to Hawaii??? Huh, do ya, huh?
-
05-24-2006, 03:28 PM #12
That looks so much better. Might give it a try.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ls wire harness
By jking78 in forum Parts Wanted / TradeReplies: 8Last Post: 03-07-2015, 05:30 PM -
Wanted: LS1 Wire Harness
By MrKid in forum Parts Wanted / TradeReplies: 0Last Post: 07-24-2010, 05:58 PM -
98 Engine bay wire harness
By Tx98Formula in forum Parts Wanted / TradeReplies: 0Last Post: 05-13-2010, 06:21 AM -
painless wire harness?
By lt1powerdc10 in forum LT1Replies: 1Last Post: 09-13-2007, 04:35 PM -
dash wire harness for Z28
By KAT in forum Parts Wanted / TradeReplies: 0Last Post: 04-21-2006, 11:34 AM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks