This is a discussion on Wiper motor within the General Help forums, part of the LSx Technical Help Section category; Yesterday my wipers got stuck in the up postion so I did a search and the threads said bad motor ...
10-26-2008, 04:18 PM #1
Yesterday my wipers got stuck in the up postion so I did a search and the threads said bad motor .Today I bought a new wiper motor, at what position do you put the dial? What direction should I place it on the bracket and motor?I swapped it out 4 times moving the dial and still no luck the wipers are not in the right postion .
10-28-2008, 03:37 AM #2
The problem started after using the wipers they would park almost straight up when shut off. After the new motor was installed they would park OK when off but when using the Delay function they would park straight up between delay strokes. I tried 2 rebuilt motors .What postion do you set up the dial(the crank arm assembly) the piece that is mounted to the motor and connects to the wiper linkage. 12 or 3 or 6 or 9 O'clock.
This is crazy 2 days trying to fix this.
Last edited by Pete Rock98; 10-28-2008 at 03:48 AM.
10-28-2008, 07:41 AM #3
Are you sure the motor is bad? My wipers did the same thing and I cleaned off all the connections and they now work fine.
10-28-2008, 08:26 AM #4
I'll will try contact cleaner on the harness connector .The oem motor was returned for a $25 core charge.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By SilverFish in forum General HelpReplies: 1Last Post: 08-10-2008, 05:29 AM
By supermegagoon in forum General HelpReplies: 22Last Post: 05-31-2008, 04:31 AM
By Ed Blown Vert in forum Almost Anything GoesReplies: 10Last Post: 02-04-2008, 11:06 AM
By 1986camarojoe in forum Forced InductionReplies: 3Last Post: 09-30-2006, 04:36 AM
By 1QuikWS6 in forum General HelpReplies: 7Last Post: 08-18-2006, 06:48 PM