Results 1 to 11 of 11

Window motors going bad?Help please

This is a discussion on Window motors going bad?Help please within the General Help forums, part of the LSx Technical Help Section category; Not sure if its both of them or not. My passenger side wouldn't go up and that was using both ...

  1. #1
    Member superman4evr's Avatar
    Join Date
    Apr 2006
    Location
    Grandville, MI
    Posts
    162

    Red Jewell Tintcoat
    2008 Grand Prix GXP

    Window motors going bad?Help please

    Not sure if its both of them or not.
    My passenger side wouldn't go up and that was using both switches driver and passenger. Took the connections off, cleaned them up and put it back on, not much better. Just a go up when I feel like it. However the drivers side was acting up after i plugged them back.
    Can both motors be failing or is it something else, fuse maybe?

    I saw the window motor install on here if I need to swap them out.
    Any suggestions?

  2. #2
    Member superman4evr's Avatar
    Join Date
    Apr 2006
    Location
    Grandville, MI
    Posts
    162

    Red Jewell Tintcoat
    2008 Grand Prix GXP

    Any suggestions???

  3. #3
    Senior Member Danger731's Avatar
    Join Date
    Aug 2000
    Location
    Indy
    Posts
    6,712
    Do A Search, I Think Nino Posted A Link Or Something

  4. #4
    Senior Member Danger731's Avatar
    Join Date
    Aug 2000
    Location
    Indy
    Posts
    6,712
    I've replaced my drivers twice now I'm at 86 k

  5. #5
    Senior Member Danger731's Avatar
    Join Date
    Aug 2000
    Location
    Indy
    Posts
    6,712
    oh its the motor btw

  6. #6
    Senior Member ninobrn99's Avatar
    Join Date
    Aug 2003
    Location
    Honolulu HI
    Age
    33
    Posts
    2,486

    Pewter
    all bore 370 Trans Am

    swap it out..cheap and easy. get it from autozone.

  7. #7
    Member superman4evr's Avatar
    Join Date
    Apr 2006
    Location
    Grandville, MI
    Posts
    162

    Red Jewell Tintcoat
    2008 Grand Prix GXP

    Nino,
    That was a nice write up you did too!

  8. #8
    Senior Member ninobrn99's Avatar
    Join Date
    Aug 2003
    Location
    Honolulu HI
    Age
    33
    Posts
    2,486

    Pewter
    all bore 370 Trans Am

    I cant take credit for the write up. Someone else did it. I just knew where it was at

  9. #9
    Member superman4evr's Avatar
    Join Date
    Apr 2006
    Location
    Grandville, MI
    Posts
    162

    Red Jewell Tintcoat
    2008 Grand Prix GXP

    Going to autozone right now to get the motor.
    I'll be putting it in tomorrow.. Hope I can do it!

  10. #10
    Senior Member ninobrn99's Avatar
    Join Date
    Aug 2003
    Location
    Honolulu HI
    Age
    33
    Posts
    2,486

    Pewter
    all bore 370 Trans Am

    one thing the write up doesnt tell you is.....WEAR LONGSLEEVES!!! I dont know if you know, but fiberglass is a bitch! Also, you're gonna see rivets already visible..those arent the ones you need to drill. Dont ask

  11. #11
    Member superman4evr's Avatar
    Join Date
    Apr 2006
    Location
    Grandville, MI
    Posts
    162

    Red Jewell Tintcoat
    2008 Grand Prix GXP

    Quote Originally Posted by ninobrn99 View Post
    one thing the write up doesnt tell you is.....WEAR LONGSLEEVES!!! I dont know if you know, but fiberglass is a bitch! Also, you're gonna see rivets already visible..those arent the ones you need to drill. Dont ask
    Holy shiat! I believe I did the same thing you did. Drilled the visible ones.
    Anyway after we talked, my drill died on me. Sent the wife to get me some metal bits and
    her friends drill. 3 hours into this and still haven't got the motor out yet.
    Last edited by superman4evr; 06-24-2006 at 12:04 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •