Window Motor

**wooddaniel** · 10-14-2009, 07:25 AM

Which part do I need to buy? I have always had the shop do it so I have never bought the parts directly. I am doing it myself this time cause it is cheaper and just wanted to know which parts to buy off ebay. Thanks. It's my passenger side window motor.

**FORD RECOVERY EXPERT** · 10-14-2009, 07:35 AM

Should just need a motor.....

**wooddaniel** · 10-14-2009, 07:39 AM

Cool. So the one on Ebay for 25$ should work???

http://cgi.ebay.com/ebaymotors/2000-...Q5fAccessories

**FORD RECOVERY EXPERT** · 10-14-2009, 07:57 AM

Yes that one will work....

This one is $72, but... Is available at VatoZone.... and has a limited lifetime warranty.

http://www.autozone.com/autozone/cat...&parentId=43-0

**wooddaniel** · 10-14-2009, 08:00 AM

Originally Posted by FORD RECOVERY EXPERT

Yes that one will work....

This one is $72, but... Is available at VatoZone.... and has a limited lifetime warranty.

http://www.autozone.com/autozone/cat...&parentId=43-0

Eh, they usually last me around 2 years, I dont drive a lot and rarely take off the t-tops or put down the windows (It's hot as shit where I live) so I am going with the cheapo. Thanks!

**WalterS6** · 10-16-2009, 04:06 AM

They arent too bad to do. I bought the autozone one and 1 yr and is still working.

**slikws6** · 10-16-2009, 04:23 AM

I replaced my Drivers side motor about 6 momths ago and just put a auto trix kit on my pass side. Now the pass side is faster than the drive side and it would not even roll up all the way before the kit. The kit takes some time but works great and only $29.00

**JonB** · 10-16-2009, 06:17 AM

Originally Posted by WalterS6

They arent too bad to do. I bought the autozone one and 1 yr and is still working.

They should be cake if they've already been done before. I think I did three motors in my z28 the first one took probably about 2hours second probably an hour the thrird was about 20min.

**FORD RECOVERY EXPERT** · 10-16-2009, 09:04 AM

<---- Drilled holes in the fiberglass.... way faster.

**gnomee** · 11-12-2009, 04:13 PM

Yeah drilling the fiberglass is the way to go.

You can find instructions on it here

www.autotrix.net/install

**wooddaniel** · 11-12-2009, 06:48 PM

It was a pain in the ass and took all day but I finally finished it the other day.

**+badss+** · 11-13-2009, 06:19 PM

i just changed my driver side motor haha was lucky the guy before me drilled it out took me like 10 mins was like woo hoo i got lucky didnt have to drill anything haha drill it once and your life will be much ewasier and the instructions for it are great

**wooddaniel** · 11-13-2009, 07:41 PM

Originally Posted by +badss+

i just changed my driver side motor haha was lucky the guy before me drilled it out took me like 10 mins was like woo hoo i got lucky didnt have to drill anything haha drill it once and your life will be much ewasier and the instructions for it are great

Yeah but I still failed a little... I forgot to hook back up the little light that goes over the window and lock switch.

**jcws6** · 11-16-2009, 04:32 AM

+1 for AutoTrix kit. It fixes the inherent voltage problem with the window motors. In my opinion, it's a lot cheaper/easier than replacing a window motor every couple years. Plus, your windows go down faster.

**autotrix** · 11-25-2009, 05:31 PM

Thanks jcws6!

**johnyta** · 12-09-2009, 09:43 AM

cheaper? i got mine done for $25 at a local shop

**Cutlass** · 12-09-2009, 10:01 AM

Originally Posted by johnyta

cheaper? i got mine done for $25 at a local shop

There's no way you had a window motor replaced for $25

**gnomee** · 12-09-2009, 01:13 PM

Maybe if he provided the motor.

**BLAKMGK** · 12-09-2009, 03:44 PM

I was able to do my driver side with no problem. You should be able to do it on your own without any special tools

Thread: Window Motor

Thread Tools

Window Motor

Thread Information

Users Browsing this Thread

Similar Threads

Window Motor

need help with window motor

Window Motor

Window Motor Mod??

Bookmarks

Bookmarks

Posting Permissions