Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Who has their intake off?!?!

This is a discussion on Who has their intake off?!?! within the General Help forums, part of the LSx Technical Help Section category; Need a dimension from the valley cover to the bottom of the wiper tray/cowl for 98-02 Camaro. TIA!...

  1. #1
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Who has their intake off?!?!

    Need a dimension from the valley cover to the bottom of the wiper tray/cowl for 98-02 Camaro.

    TIA!

  2. #2
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Not to many here have them off.


    What exactly are you wanting to do? Are you looking a different intake from the LS1/6, BBK or FAST series?

  3. #3
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by SMWS6TA View Post
    Not to many here have them off.


    What exactly are you wanting to do? Are you looking a different intake from the LS1/6, BBK or FAST series?
    LMAO....something like that. I've got a Kinsler ITB that measures 8 3/4" from valley cover to the top of the fuel rail. Just want to confirm if I'll get away with shims on the K-member, cut the cowl or both.

  4. #4
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Based on the pics I've seen it depends on with stacks you get you may need to cut.

    It would be neat to see one have it.

  5. #5
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    It'll have it....after all the pain to this point, no turning back! Heads off to the body shop next week.....again

  6. #6
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    please post some pics

  7. #7
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    My intake is off, give me 20min to eat and i eill run back to the garage and measure it.

  8. #8
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    Looks like 8 1/2 inches from valley pan to the bottom of the cowl.
    Callies 383, Trick Flow 225, Rapid Motorsports Dominatior 2 X cam, ls6 ported oil pump,42lb injectors, FAST 92/92 , ASP underdrive pully, eletric water pump, Pacesetter LT's, Pacesetter ORY, Magnaflow catback, e-cutout, Yank SS 3600, Performabuilt stage 2 4l60e, Strange S60 ,4.10s, Detroit Truetrac, (UMI) - Adj. LCA, Adj. tunnel mount torque arm, Adj. panhard bar, Drag bar, subframe conectors, shock tower brace. 465rwhp-438rwtq 11.09@119.90.

  9. #9
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by cpop98ws6 View Post
    Looks like 8 1/2 inches from valley pan to the bottom of the cowl.
    Holy shit, you're my new hero, lol!!

    Not that I dont believe you, any chance you can take a pic? Is that under the wiper tray or the leading edge of the flange where the upper and lower meet?

  10. #10
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by SMWS6TA View Post
    please post some pics
    Of my intake?

  11. #11
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    Quote Originally Posted by xssv View Post
    Holy shit, you're my new hero, lol!!

    Not that I dont believe you, any chance you can take a pic? Is that under the wiper tray or the leading edge of the flange where the upper and lower meet?
    I'll get you a pic. That was just under the cowl, where the upper and lower meet. I did try to get a pic but there was too much glare off of the tape with the flash on my phone.

  12. #12
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by cpop98ws6 View Post
    I'll get you a pic. That was just under the cowl, where the upper and lower meet. I did try to get a pic but there was too much glare off of the tape with the flash on my phone.
    Thanks! Really appreciate the effort!!

  13. #13
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    The pic really sucks, but it just over 8 1/2 to the bottom of the cowl.


  14. #14
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by cpop98ws6 View Post
    The pic really sucks, but it just over 8 1/2 to the bottom of the cowl.

    Click for full size
    Great! Thanks....

    Any chance you measured (or can) the height from at the back of the valley straight up? If you notice under the cowl, there's a "tray" that has to clear the passenger side wiper arm. Might be another inch or so lower....
    Last edited by xssv; 03-09-2012 at 01:45 AM.

  15. #15
    Senior Member cpop98ws6's Avatar
    Join Date
    May 2010
    Location
    Wilkes-Barre, PA
    Posts
    1,545

    Black/Black
    98 WS6/04 Sierra Dmax

    I put my intake back on last night, sorry man.

  16. #16
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Quote Originally Posted by xssv View Post
    Of my intake?
    If you get the new intake that you are looking at installed.

  17. #17
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by cpop98ws6 View Post
    I put my intake back on last night, sorry man.
    DOH! Thanks....you got me a little closer, lol.

    Quote Originally Posted by SMWS6TA View Post
    If you get the new intake that you are looking at installed.
    I have it, its on.....not been done before. Dimensionally, its very close but will require some massaging to work. Trim the wiper tray, maybe a small shim on the K-member.


  18. #18
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Have you dyno the engine yet?


    That looks bad ass.

  19. #19
    Member xssv's Avatar
    Join Date
    Sep 2010
    Location
    Michigan
    Posts
    312
    01 SS

    Quote Originally Posted by SMWS6TA View Post
    Have you dyno the engine yet?


    That looks bad ass.
    Thank-you!

    Dynoed three times...three different cams. Last two were 803 and 796 respectively....kept the last one.

  20. #20
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511

    Navy Blue Metallic
    98 T/A w/a little mods...

    Dumb question but where or how is the air filter?


    And looking at the pic I think you'll need to do some cowl work and maybe a hood mod to make it fit.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BBK SSI Intake, vs Holley Intake, vs LS6 intake, vs PP 96mm
    By Lunatikgixxer in forum External Engine
    Replies: 26
    Last Post: 02-28-2017, 11:39 AM
  2. Question: HOW TO: Swap stock intake with LS6 intake
    By thechad125 in forum General Help
    Replies: 18
    Last Post: 02-26-2013, 04:17 AM
  3. LS6 intake manifold and 227 Intake runners
    By IT_SS in forum Internal Engine
    Replies: 4
    Last Post: 07-07-2009, 03:11 PM
  4. Single Plane Intake VS Stock PP Intake
    By xzaero0 in forum Forced Induction
    Replies: 1
    Last Post: 11-27-2007, 08:00 PM
  5. Difference in Stock Ram Air intake and other aftermarket intake
    By WS6-cobra killer in forum Firebird / WS6
    Replies: 5
    Last Post: 01-15-2007, 07:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •