Vats help!!!!

**99WS6MAN** · 07-18-2011, 12:23 PM

I have a question .... I have pellet 12 @ 6040 OHM but I cannot find that value anywhere!!! What are you guys using for this value for VATS

**Knight** · 07-18-2011, 01:04 PM

You may need to use a few resistors to get to the value you need.

**2001NBMZ28** · 07-18-2011, 01:33 PM

6040 is the nominal value. Resistors measuring 5798-6302 will work. Doesn't have to be exact.

**JayTA98** · 07-18-2011, 02:41 PM

I use a 6k resistor or four 1.5k in series soldered together. It will work

**99WS6MAN** · 07-18-2011, 03:11 PM

So will the 6k work? Can you show me some pics? I'm not that technical so I want to make sure I get it right the first time! I was embarrassed at the Wash Tub because my car wouldn't start so it held up the line! lol

**JayTA98** · 07-18-2011, 06:30 PM

just twist the ends, cut the excess and solder were the resistor conects to another. I then put them together next to each other and put heat shrink in every 2 resistors to insulate them. Then tape the whole thing. You can use tape instead of heat shrink.