Spohn Torque Arm

**topgun1851** · 01-17-2007, 06:16 AM

Posted this in the suspension/handling section, but I see it as chasis, which there is no tab for that.

Starting to hear some noises from my torque arm because its starting to loosen up. When I got under the car and started shaking it around to see where it loosened up, I found it where it attaches to the braces that attaches to the car (see pic, loose at the arrow). At the arrow, I can move the joint up and down 1/8-1/4 inch. The torque arm has been on the car for less than a year. Anyone have advise how to tighten it up, or what can be done to fix/prevent it from happening again? Thanks in advance.

**barryTA** · 01-17-2007, 06:58 AM

have you tryed tighten it with an open end rench?

**barryTA** · 01-17-2007, 07:03 AM

before you tighten it you might want to use some lock tight

**topgun1851** · 01-17-2007, 11:24 AM

i dont think squeezing the heck out of it will help... it might for a few days, but that will loosen up again... its something internal, i think

**barryTA** · 01-18-2007, 07:32 AM

is it moving around after you tighten it ?meaning is their any play after you
tighten it? if so you have a different problem if it dont wiggle around after
you tighten it then you should use lock tight when you tighten it. and that
should stop it from coming lose.