So i need another one of these....

[95camaroZNC]

Ive been looking for another one, my stock one does not fit anymore since i put my x pipe in. Is there a place, or someone on here, who makes and sells one that will fit the car or any advice anyone can give me. Or should i just beat the black sheet metal one with a hammer till it fits?

[Smittro]

subscribed...

[Cutlass]

What do you need???

[Glue Maker]

im trying to figure out what he need also,

[Smittro]

What do you need???

im trying to figure out what he need also,

Me 3! That's why i subscribed.lol

[marksls1ta]

I think he is talking about the flat metal piece that ties the bottom together.

I have mine removed. You can remove it no problem.

thanks,
Mark

[Cutlass]

but he has a tunnel mount torque arm crossmember there, doesn't he?? No need for that stock tunnel brace anymore.

[Lunatikgixxer]

what kind of x pipe is that? its nice as hell

[95camaroZNC]

I need the arm thats going across holding the exhaust up, thats someone elses car to show the piece i need, i have a custom set up and my old one doesnt work or at least i havent been able to get it to fit up under there.

Sorry i didnt get to this sooner.


See how mines missing said brace back there where the pipes come together.

[blackbird0230]

I need one too. I was gonna cut and bend and reweld the stock one but I've been lazy, I don't have one at all right now.

[cammed goat]

You running true duals? Either leave it off, or have a brace custom made to clear the X-pipe.

[Cutlass]

If you use that brace to hold the exhaust up, then you'll have one heck of rattle under there.

[95camaroZNC]

Well right now its rattling under my feet, i thought that would solve it by stiffening it up, is hanging it on the hanger on the passangerside any better?

[cammed goat]

Depends on the diameter of the pipe and the clearance needed from the ground. Try using the pass side hanger and see if it helps.

[95camaroZNC]

Depends on the diameter of the pipe and the clearance needed from the ground. Try using the pass side hanger and see if it helps.

I will indeed do that this weekend and post if it helps. If it doesnt *shrug* its 3 inch and its into a x pipe thats 3 inch. To answer your question.

[cammed goat]

I doubt you will have any contact issues using the hanger.

[95camaroZNC]

Oh and this possibly?93-02 Spohn Tubular Tunnel Brace

[cammed goat]

I dunno about removing the torque arm. Sounds like a bad move to me.

[95camaroZNC]

Well its the brace for the back not really the torque arm.

[cammed goat]

Ah. I see. I thought you planned on removing the tq arm. I never heard of that tho.