Results 1 to 3 of 3
-
09-24-2006, 12:10 PM #1
shuttering noise?Ujoints?transmount?torquearm?
Ok..I have a shuttering noise coming from what sounds like the rear of the car, but I cant be certain. I know the tranny has gotten a little sloppy in performance as far as vibration and clunking goes. When Im driving down the street, under acceleration its not evident, but if I take my foot completely off the pedal and someitmes manipulate the steering wheel turning left a little, its makes a horrible shuttering noise like something is loose or broken. Sometimes it makes the noise going straight. i have heard the noise for a few months now, but ever since I put my Eibachs, shocks/struts, LCAs w/ relo brackets, and PHR on, the noise has become more evident and more consistent. Any ideas? I think its either the trans mount, or something to do with the U joints or torque arm. How can I check these besides visual inspection, of course?
-
09-24-2006, 01:46 PM #2
check the mount at the transmission for the torque arm. The bushing is either worn or the bolt is loose.
-
09-24-2006, 06:49 PM #3
- Join Date
- Oct 2005
- Location
- Houston
- Posts
- 79
Sebring Silver- 98 Z28
i have the same problem and i found so far that the torque arm bushing is ripped so i ordered a edelbrock torque arm and new bushing. i also need a rack and pinion
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Noise
By Darkrider02 in forum Manual TransmissionReplies: 2Last Post: 11-05-2010, 12:04 AM -
clutch shuttering
By incbed in forum Manual TransmissionReplies: 9Last Post: 04-23-2010, 10:18 AM -
noise
By texas twister in forum Automatic TransmissionReplies: 2Last Post: 03-21-2009, 04:44 PM -
shuttering noise..still havent found out
By BlackZ28629 in forum DrivetrainReplies: 39Last Post: 07-21-2007, 12:56 PM -
what kind of Ujoints to buy..should I have a shop do it?
By BlackZ28629 in forum DrivetrainReplies: 9Last Post: 10-25-2006, 09:02 PM
Bookmarks