This is a discussion on resistance failure within the General Help forums, part of the LSx Technical Help Section category; i have a 2000 ws6 andim having problems with my vats so i tried a bypass, the resistance on my ...
02-23-2008, 05:18 PM #1
- Join Date
- Dec 2007
- 2000 pontiac trans am ws-
i have a 2000 ws6 andim having problems with my vats so i tried a bypass, the resistance on my key is -0.887 i went to radioshack and could not find a resistance close to that number so i bought one that was 687ohms and another one that was 1k neither of the two values worked what resistance can i buy that will work on my car, because radioshack did not have the resistance of -0.887,what resistance can i buy that will work?
02-24-2008, 06:10 AM #2
- Join Date
- Aug 2005
- 99 trans am ws6
couldnt you just get multiple ones and hook them up in series to add up to 887
02-24-2008, 07:39 AM #3
yeah, if they don't have one within your range just put 2 together in a series to add up to 887 or as close as you can get. Your pellet has a range and you want to be as close to the middle of that range as possible due to resistor variances.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By supercampeones4 in forum General HelpReplies: 1Last Post: 02-22-2008, 02:06 PM
By Jon02EB in forum CorvetteReplies: 3Last Post: 06-13-2007, 03:31 PM
By MikeSomething in forum General HelpReplies: 8Last Post: 09-13-2006, 04:16 PM
By KM02SS in forum External EngineReplies: 1Last Post: 09-06-2006, 11:11 AM
By SeVeReDiStOrTiOn in forum General HelpReplies: 17Last Post: 04-12-2006, 10:39 PM