Results 1 to 14 of 14

Rear Banjo Bolts on 2000 Camaro Z-28

This is a discussion on Rear Banjo Bolts on 2000 Camaro Z-28 within the General Help forums, part of the LSx Technical Help Section category; Guys and Gals,,,, Desperate here I searched everywhere and every place imaginable for the Rear Brake Hose Banjo bolts for ...

  1. #1
    Junior Member
    Join Date
    Dec 2012
    Location
    Tampa,Florida
    Posts
    9

    Red
    2000 Camaro Z28

    Rear Banjo Bolts on 2000 Camaro Z-28

    Guys and Gals,,,, Desperate here I searched everywhere and every place imaginable for the Rear Brake Hose Banjo bolts for a 2000 Camaro Z-28. I bought remanufactured calipers and when I attached the original banjo's they stripped. Turns out the reman calipers were not completely reman'ed. Chevy says they are discontinued. Size and or where to buy would be greatly appreciated.... I'll buy lunch if your ever in Tampa!

  2. #2
    Senior Member bigrondownhiller's Avatar
    Join Date
    Feb 2006
    Location
    Orange County, NY
    Age
    42
    Posts
    2,674

    Black
    1996 Camaro Z28 vert

    Is it the head or threads of the bolt that is stripped?

  3. #3
    Junior Member
    Join Date
    Dec 2012
    Location
    Tampa,Florida
    Posts
    9

    Red
    2000 Camaro Z28

    Just the threads on the bolts...

  4. #4
    Junior Member
    Join Date
    Dec 2012
    Location
    Tampa,Florida
    Posts
    9

    Red
    2000 Camaro Z28

    That's going to be my last resort....I don't want to screw up the caliper threads for a $4 part, unfortunately no one carried them. Can't figure that out for the life of me. I guess not to many folks buy remanufactured garbage.

  5. #5
    Senior Member bigrondownhiller's Avatar
    Join Date
    Feb 2006
    Location
    Orange County, NY
    Age
    42
    Posts
    2,674

    Black
    1996 Camaro Z28 vert

    Would any of these fit? Dorman Products - Search Results. Sears carries a thread chase kit. Might be able to save the bolt.

  6. #6
    Junior Member
    Join Date
    Dec 2012
    Location
    Tampa,Florida
    Posts
    9

    Red
    2000 Camaro Z28

    I checked all of the Dorman fitments and none were listed for 2000 camaro. I sent them an E-mail to see is they have an exact part number. I have a thread chase kit. I just don't want to screw up the caliper.... I am going to try it with the old caliper first. Thanks for everyone's reply.

  7. #7
    Senior Member bigrondownhiller's Avatar
    Join Date
    Feb 2006
    Location
    Orange County, NY
    Age
    42
    Posts
    2,674

    Black
    1996 Camaro Z28 vert

    I would bring the old one in the parts store and try to match it up. Have you tried the junkyard?

  8. #8
    Member Guerrillakilla13's Avatar
    Join Date
    Feb 2011
    Location
    Arizona
    Posts
    476

    Silver
    2002 Trans Am WS6

    ^^^^^^^^ X2. Bring your old bolts in to a parts store.

    Since you said you searched everywhere, i'm going to assume you already went to a junkyard or checker o reilly..? When I had trouble finding bolts for my panhard bar, the guy at checker gave me two different bolt options that could be it. One of those 2 kits fit perfectly. Granted we did some testing in the parking lot to where my hand could fit to get a general idea, but since you already have a stripped bolt bring that in and see what you can find.

  9. #9
    Junior Member
    Join Date
    Dec 2012
    Location
    Tampa,Florida
    Posts
    9

    Red
    2000 Camaro Z28

    Junk yards are closed to day but I put out some e-mail questions to local Junk years... I just tried to retap it and I think its 10x1....unfortunately of the 50 piece set no m10x1...I brought the bolt to O'reily, Napa, Autozone, Chevy, advanced auto, pepboys and walmart ,, no matches..

  10. #10
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,520

    98 Formula
    06 duramax

    I just did some looking around and couldn't find anything for you. Jc Whitney has some universal banjo bolts but you'd have to tap the caliper I'm sure to get them work. Good luck and I'll keep looking around and see if I can at least find a part number for you....not sure that'd help much since they're discontinued but it may help with the search to at least get the thread size and pitch. I have a disc here somewhere that lists every part number on these cars.....the problem will be finding that disc. I'll see what I can find though.

  11. #11
    Junior Member
    Join Date
    Dec 2012
    Location
    Tampa,Florida
    Posts
    9

    Red
    2000 Camaro Z28

    GMPARTSEAST sells the entire brakeline with the Banjo for around $30.... They list it in stock... Sent them a note just to make sure.

  12. #12
    Senior Member bigrondownhiller's Avatar
    Join Date
    Feb 2006
    Location
    Orange County, NY
    Age
    42
    Posts
    2,674

    Black
    1996 Camaro Z28 vert

    http://www.holley.com/977517ERL.asp. They list it as a 10x1. They had a couple others listed.

  13. #13
    Retired NOT tired SteveC's Avatar
    Join Date
    Jul 2005
    Location
    Poway, Ca
    Posts
    1,126

    SOM
    2001 Z28 (Sara)

    If you replaced the calipers, it would be time to replace the brake hoses (if you have not already), I purchased the "Russell" ss braided hose, and they came with heavy duty banjo bolts and washers.

    Do it once, do it right.

  14. #14
    Super Moderator
    pajeff02's Avatar
    Join Date
    Feb 2009
    Location
    Mansfield, PA
    Posts
    21,576

    Black & Blue
    '02 WS.6 / '07 Suburban

    If my Russell braided lines came with new bolts, I should have my old ones out in the lower garage. Just cannot recall if bolts were included in the kit...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2000 camaro Z28 rear spoiler
    By camaross1 in forum Parts For Sale / Trade
    Replies: 1
    Last Post: 08-07-2010, 07:37 PM
  2. 2000 Camaro SS parts needed Front and rear bumper
    By A 2000 SS in Jersey in forum Parts Wanted / Trade
    Replies: 7
    Last Post: 04-14-2010, 07:49 PM
  3. Question: What rear end came in the 2000 Camaro SS?
    By Lehrman7556 in forum Drivetrain
    Replies: 19
    Last Post: 02-14-2010, 06:46 AM
  4. 02 Camaro rear caliper banjo bolt?
    By TedsB4Csled in forum Camaro / SS
    Replies: 3
    Last Post: 05-19-2008, 12:15 PM
  5. 2000 Camaro Ss Factory Rear Hatch / Spoiler - Complete In Black
    By LS1W in forum Parts For Sale / Trade
    Replies: 7
    Last Post: 10-31-2007, 08:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •