Results 1 to 12 of 12
Thread: Ram Air Mod
-
08-28-2005, 06:20 PM #1
- Join Date
- Aug 2005
- Location
- missouri
- Age
- 38
- Posts
- 179
Artic White- 2002 Ws6
Ram Air Mod
Whats up i seen a couple of people on cardomain.com that have drilled out the rivets on the restriction plate under the hood and removed the piece. I was wanting to know if this really matters at all or if it will hurt my car?
-
08-28-2005, 06:23 PM #2Originally Posted by bwinch
do it, its worth it, i did it to my Z28 and when you do buy a lid and K&N and you should get about 15-20 hp i believe, it breaths so much better and makes a very noticable difference
-
08-28-2005, 06:31 PM #3
- Join Date
- Aug 2005
- Location
- missouri
- Age
- 38
- Posts
- 179
Artic White- 2002 Ws6
ram air mod
Thanx i already the slp induction package with k&n. I just wanted to do some checking prior to drilling it out.
-
08-28-2005, 06:32 PM #4
i just cut the whole bottom out from under my lid, there is a web site that shows how to do it step by step ill try and find it for you
-
08-28-2005, 07:05 PM #5BBATCARGuest
Took out baffles, sealed hood to air box, K & N and direct flow lid.... Really helps, plus I get 30 miles more per tank full of gas
-
08-28-2005, 07:17 PM #6
http://www.installuniversity.com/ins...sity/index.htm
on the left click on the install link then the ram air link
-
08-29-2005, 05:25 PM #7BeastGuest
If you drill out the baffles, be careful while driving in the rain!! You will now have a "ram air" effect with water water-logging the filter, and trying to get into the motor. I'm not saying not to do it... just keep that in mind.
Mark
-
08-29-2005, 06:23 PM #8
- Join Date
- Aug 2005
- Location
- missouri
- Age
- 38
- Posts
- 179
Artic White- 2002 Ws6
thanks
thanks for the advice guys i believe i am going to try it out and i will post again and let you know how it woked.
-
09-10-2005, 01:24 PM #9
- Join Date
- Aug 2005
- Location
- St. Peters, MO
- Posts
- 34
Navy Blue Metallic- 2001 WS6
Dont mess with the baffles just cut out the lower airbox. You ruin the hood when you cut out the bafflles and the lower airbox mod is more than enough intake area for the car.
-
09-14-2005, 06:33 PM #10
- Join Date
- Aug 2005
- Location
- missouri
- Age
- 38
- Posts
- 179
Artic White- 2002 Ws6
yeah once read up on it a little bit i realized it isnt worth it so thanks anyway guys
-
09-14-2005, 09:14 PM #11Originally Posted by BBATCAR
-
09-15-2005, 04:14 PM #12
- Join Date
- Sep 2005
- Location
- ft hood tx
- Age
- 38
- Posts
- 33
black- 2001 pontiac transam
you can also just take out the honey come looking thing inside the air intake pipe that adds a little
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks