Results 1 to 1 of 1
-
06-17-2006, 10:04 PM #1
- Join Date
- Jun 2006
- Location
- houston
- Age
- 50
- Posts
- 45
Lemans Blue- 06 Corvette
Putting together my mod list for 2006 C6 A6
Let me know what you think and if you have any suggestions.
My basic goal is to have over 450 RWHP NA while maintaining a good fat torque curve. like to run low 11's in the 1/4. The car is a daily driver with about 50 miles total daily commute in Houston heat and traffic, to / from downtown.
Baseline Dyno today at MTI
341/341
first round: Starting off with LT headers:
What's the best, LG or Kooks? other?
I'm thinking I should get 25 or 30 rwhp from this.
2nd round: Next step I think would be CAM. Initially thinking 224/224 581/581 114 LSA. I hear I need to go on the mild side because the 06 vette's pcm is sensitive.
At this time, I would also do the 160 thermostat and an UD pully.
I'm also concidering new heads at this time, but I am not sure which route to take. Any one with an LS2 have some experience here?
cold air intake... seen a few out there, but would like something safe for runing through the occasional large houston puddle.
I'll also get a dyno tune after the work on the engine. I've been trying to find out some good information, but have conflicting data on whether or not the tuners can get around the TM. The tuners can at least set my afr, shift points and timing, correct?
3rd round: Exhaust note and drive train
Like a good catback system with agressive note and no drone.
After the TM can be tuned out of or at least controlled in the a6, then I'd like to put in a tc that will still make the the car usable as a daily driver and probably 3.73 gears. I don't know much about automatics and TC's yet, I've been drving standards (svt cobra) for the last 7 years.
What do you guys think, am I missing anything obvious? Am I over ambitious in my expectations for these mods?
Thanks for your help!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Question: Putting a cam in my car need to know
By breathnitrous in forum Computer & TuningReplies: 10Last Post: 04-24-2010, 06:09 PM -
Putting them to bed.
By pajeff02 in forum General HelpReplies: 19Last Post: 11-19-2009, 07:38 PM -
Putting together my 408
By lancesT/A in forum General HelpReplies: 17Last Post: 08-07-2009, 11:26 AM -
putting ls2 into 4th gen camaro
By maxgee in forum External EngineReplies: 9Last Post: 06-06-2009, 05:21 AM -
putting the car away
By 98redbird in forum General HelpReplies: 6Last Post: 11-18-2005, 03:31 PM
Bookmarks