Results 1 to 2 of 2

Pully right under alternator... what do i torque it down to?

This is a discussion on Pully right under alternator... what do i torque it down to? within the General Help forums, part of the LSx Technical Help Section category; Hey Im changing out the tensioner pully under the alternator that runs the AC thing. The write up on Intall ...

  1. #1
    Member
    Join Date
    Jan 2006
    Location
    houston
    Posts
    205

    Navy Blue
    ls1 trans am

    Pully right under alternator... what do i torque it down to?

    Hey Im changing out the tensioner pully under the alternator that runs the AC thing. The write up on Intall university says to tighten it to 35 foot lbs of torque.. is this the same... and do I just remove the center bold on the pully for the belt to come off.. also do I have to take the drive belt off too in order to do the AC belt install. Last one... its making a rattling noise now... what will happen if I dont change out a pully with a bad bearing? Thanks Guys

  2. #2
    Member
    Join Date
    Jan 2006
    Location
    houston
    Posts
    205

    Navy Blue
    ls1 trans am

    Do I torque it down to a certain spec or is that not important?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •