Results 1 to 6 of 6

Plug Change Inquiry

This is a discussion on Plug Change Inquiry within the General Help forums, part of the LSx Technical Help Section category; first of all i was looking at these plugs http://www.boschautoparts.com/Produc...lugs/Platinum2 how do they look, i havent heard about them before. ...

  1. #1
    Senior Member ss~zoso~ss's Avatar
    Join Date
    Dec 2004
    Location
    )
    Posts
    9,128

    SS: NBM, tan top
    1998-SS, 2010 Jetta TDI

    Plug Change Inquiry

    first of all i was looking at these plugs http://www.boschautoparts.com/Produc...lugs/Platinum2
    how do they look, i havent heard about them before.

    i also would like to know how much i would gain from aftermarket wires, and what are the best kind under 80 bucks

    lastly, please leave any comments about an install like this, i have read the document on www.installuniversity.com and it seems challenging but not impossible.... i just dont want to get stuck

  2. #2
    Senior Member ss~zoso~ss's Avatar
    Join Date
    Dec 2004
    Location
    )
    Posts
    9,128

    SS: NBM, tan top
    1998-SS, 2010 Jetta TDI

    better yet, i found the bosch plugs one step up for a good price

    http://store.summitracing.com/partde...5&autoview=sku

  3. #3
    Life in the Fast lane sunsetorangess's Avatar
    Join Date
    Aug 2005
    Location
    Bragg NC
    Posts
    2,835

    Met. Sunset Orange
    01 SS

    What mods do you have? I mean you can pick up some msd wires for under 80 bucks but i dont think you will see much of a gain if any...
    just my op. thou
    J
    2001 SS, Its not the car its the Driver that matters....

  4. #4
    Senior Member ss~zoso~ss's Avatar
    Join Date
    Dec 2004
    Location
    )
    Posts
    9,128

    SS: NBM, tan top
    1998-SS, 2010 Jetta TDI

    mods in sig
    98' SS Convertible Camaro-76k-Build # 1471, Cragar SS rims, RK SFC's, MAC Panhard, LSX Tune, Shaner S3,
    SLP:short thro,Strut tower brace,fan switch
    MTI Power induction kit,40 Series muffler,Pacesetter LT's + ORY,12 CD changer,3800lbs
    http://www.cardomain.com/ride/787506/1

  5. #5
    Junior Member
    Join Date
    Apr 2006
    Location
    Madison, AL
    Age
    38
    Posts
    2
    Most the the plugs are fairly easy to get to (for a Fbody). The one that will likely make you is the #8. I had to use a universal joint and every extension I had (think it was about 24") to get mine from under the car.

  6. #6
    Senior Member ss~zoso~ss's Avatar
    Join Date
    Dec 2004
    Location
    )
    Posts
    9,128

    SS: NBM, tan top
    1998-SS, 2010 Jetta TDI

    yea
    drivers side is cake, i checked number 1 and 5 today

    the gap was like.070 i figured because i had a tool and there was play when i put the .060 gap in and the .080 didnt quite fit

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •