Performance Package

[FuhBreezeE]

Ok,

If we change everything around for you.. It's as follows...........

Trick Flow ported LS1 heads............................................. .........2550.00
Head gaskets .................................................. ............................78.00
Custom Push Rods .................................................. .................145.00
Labor to replace heads .................................................. .............440.00
RPM5 CAM .................................................. ............................399.99
GM crankshaft bolt .................................................. .....................5.00
GM Timing cover gasket .................................................. ............21.49
GM Front seal .................................................. ..........................17.99
Labor to install cam .................................................. .................350.00
Pacesetter coated headers .................................................. .......478.00
Labor to install headers .................................................. ............160.00
Precision Industries Convertor ...(any stall) ...................................725.00
Trans fluid .................................................. ................................11.96
Install torque convertor .................................................. .............240.00
B&M Trans Cooler .................................................. .....................65.00
Install trans cooler .................................................. ...................120.00
GM LS6 intake .................................................. ........................550.00
GM water bypass lines and caps.............................................. .....55.00
Install intake manifold.......................................... .........................80.00
Motive 3.73 gears............................................. ..........................222.99
Install kit for 10 bolt.............................................. ........................35.00
Install gears............................................. ..................................360.00
True duals............................................. ....................................470.00
Subframe connectors...(BMR)................................ ......................199.95
Install subframe connectors........................................ ...................80.00
H?P Tuners full dyno tune with lifetime updates.............................399.75

Total............................................. ..........................................8259.72
Tax and shop supplies.......................................... .....................518.63
Total.... out the door.............................................. ..................8778.35.

What do y'all think? This was a quote from Real Performance Motorsports (RPM)

[0rion]

I would be leary of someone that double dips on labor.

[FuhBreezeE]

Yea $1700 in labor is a bit much, but I received another quote from a friend....
Port and flow heads - 5 angle valve job, resurface heads(take apart and reassemble) $1400.
I furnish cam/springs, tappets, oil pump, gaskets and bolts.
Painted pacesetter headers $460
02 sim $140 for the pair
Set up gears $500 (i supply ring/pinion/bearing kit)
Labor for above $1500
comes out to be $4k flat. This is w/o sales tax. Which seems better?

[SSwt00SS]

again, you dont need O2 Sims...

you will need a tune regardless and the tuner can tune them out, so save yourself $140 dollars my friend...

also you can find an Ls6 intake for around $300 bucks, not $550...

[greatwhiteZ28]

good deal on header install thoe, in the D they want like 700 for install, but 120 for trans cooler install is twice for the cooler. i would do that your self. save some money its easy. since your doing a lot at once , which is a good thing to do , you should also see some stuff that you can do to save some money.

here is some instruction for the cooler. at least do that its like a 30 min job

[greatwhiteZ28]

http://www.bfranker.badz28.com/94Z/trannycooler.htm

[FuhBreezeE]

Thanks for the advice, guys. I appreciate it.

[35thAnniZ28]

theres many of those that you could do YOURSELF.././/..and a couple of friends...think about it and try saving some money