Results 1 to 17 of 17
-
02-20-2007, 05:05 PM #1
- Join Date
- Aug 2005
- Location
- ORLANDO,FL
- Age
- 51
- Posts
- 444
SUNSET ORANGE- 2001 PONTIAC TRANS AM WS6
paint work done and 3 warring lights come on.
I took my car to get some paint work done on the driver side door and the front bumper. After i left the ABS INOP,BRAKE,SERVICE LIGHTS came on i looked in the book nothing. But why should these light come on after some paint work?
I did use the obd2 and it found no codesLast edited by 2001somws6; 02-20-2007 at 05:26 PM.
-
02-20-2007, 05:31 PM #2
This is why I cringe at the thought of having to hand over the keys...to anyone.
-
02-20-2007, 05:35 PM #3
- Join Date
- Aug 2005
- Location
- Cape Coral, FL
- Age
- 39
- Posts
- 3,100
Mystic Teal- 99 Trans Am & 01 CBR 929
maybe a dumb question... have you checked out your brakes
-
02-20-2007, 05:37 PM #4
- Join Date
- Aug 2005
- Location
- ORLANDO,FL
- Age
- 51
- Posts
- 444
SUNSET ORANGE- 2001 PONTIAC TRANS AM WS6
ha yea. MMr23 a mod on here did my brakes 4 months ago and had no problems with them.
-
02-20-2007, 06:08 PM #5
Have you looked underneith fro any damaged wiring?
-
02-20-2007, 06:13 PM #6
- Join Date
- Aug 2005
- Location
- ORLANDO,FL
- Age
- 51
- Posts
- 444
SUNSET ORANGE- 2001 PONTIAC TRANS AM WS6
Yea i did but its really dirty by the brakes and all under there.
Someone posted this on another board.
this happened to my gf's Durango
I pulled the electrical connectors on the ABS on the front brakes and cleaned them out (a lot of brake dust) and the problem went away. The paint shop might have gotten a little on the connectors.
(I know its not an F-bod but you never know)
-
02-20-2007, 06:15 PM #7
Electronics are funny things. Its a good start.
-
02-20-2007, 06:15 PM #8
Same thing happened when I washed the engine bay once. (same lights)
It only happened for about a day, afterwards they never came on again.
-
02-21-2007, 12:15 AM #9
Check the wiring running from the L/f wheel, through the wheel opening, then up to the harness. They probably disconnected or damaged it.
-
02-21-2007, 07:36 AM #10
the reason why it showed no codes is an OBDII code reader can not read ABS codes they have theyre own parameters and unless you have like a TECH II(GM scantool) you wont read them...something probably got unplugged or a ground got knocked loose...take it back make em fix it
-
02-21-2007, 07:39 AM #11
Nice angle shot in your Avatar there Irader99
-
02-21-2007, 03:29 PM #12
The paint shop will probly say that the lights were on before you brought it to them. Just take it by the nearest Gm dealer and have them take a look at it.
-
02-21-2007, 03:58 PM #13
- Join Date
- Aug 2005
- Location
- ORLANDO,FL
- Age
- 51
- Posts
- 444
SUNSET ORANGE- 2001 PONTIAC TRANS AM WS6
I called them today and told them about it. and they said "they are still on" We can take a look at it for you. Im going in the morring to pick up the front plate.
Some have been saying it may be caused by the dust on the sensor by the rotor. And they said all we did was jump start it.
-
02-22-2007, 10:01 AM #14
- Join Date
- Aug 2005
- Location
- ORLANDO,FL
- Age
- 51
- Posts
- 444
SUNSET ORANGE- 2001 PONTIAC TRANS AM WS6
I found out it was water in the abs fuse and blew it out. I think they still owe me 90 dollars for taking it to the dealer.
-
02-23-2007, 09:00 PM #15
-
02-23-2007, 09:20 PM #16
- Join Date
- Aug 2005
- Location
- ORLANDO,FL
- Age
- 51
- Posts
- 444
SUNSET ORANGE- 2001 PONTIAC TRANS AM WS6
I did get the 90+ dollars back.
-
02-25-2007, 03:15 PM #17
good deal.
Cold Air Intake, Muffler Delete, Vinci High Performance Dual Valve Springs, Hardened Pushrods, Yella Terra 1.85 Rockers, Some Hydropdipped Stuff, Strut Tower Brace, Some SS Badges, boost/vacuum gauge, fuel pressure gauge, some checkered stripes, drilled/slotted rotors, ZL1addons Stealth wickerbill, Ruxifey LED side markers
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Help: Paint on FOG lights
By BiGPaPaSMuRF in forum General HelpReplies: 10Last Post: 02-13-2011, 09:19 AM -
Body Work & Auto Paint Tips - Get Your Paint On
By Ed Blown Vert in forum Camaro / SSReplies: 0Last Post: 04-09-2009, 10:50 PM -
Paint Work
By langss in forum Appearance SectionReplies: 1Last Post: 01-18-2008, 11:38 PM -
Paint Work
By langss in forum Western MembersReplies: 1Last Post: 01-16-2008, 03:40 PM -
A little more paint work!
By Capster78 in forum Almost Anything GoesReplies: 43Last Post: 05-03-2006, 10:04 AM
Bookmarks