Results 1 to 4 of 4
Thread: Oxygen Sensors
-
06-28-2008, 06:27 PM #1
Oxygen Sensors
Alright i have a dumb question. ive never changed an o2 sensor in my life. I went under the car to attempt but all of them are practically impossible to even turn and im afraid of braking something. Anyway once i do get around taking it out...then what? Do i have to disconect the cable that is connected to it too? Cause i cant see when the cable ends. These are all ittiotic newbie questions but i really wanna learn. Is there a website like install University or LS1 Howto that explains how to do this? Any help would be most appreciated.
Thanks in advance!
-
06-30-2008, 06:08 AM #2
um first off your not gonna break anything, and when you get it out, do not take the wires from the back of the sensor it self, trace the wire to the connector and just simply disconnect it, and your done...
-
06-30-2008, 07:07 PM #3
thanks!
-
06-30-2008, 07:25 PM #4
spray some lube on it about 15 min before then when you install the new one put anti-seize on it
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
oxygen sensors after cats
By jwindbigler in forum General HelpReplies: 15Last Post: 02-24-2015, 08:37 PM -
Question: Do Oxygen Sensors fix themselves?
By herculesrider1 in forum Firebird / WS6Replies: 7Last Post: 08-13-2013, 01:09 PM -
Oxygen sensors
By Nater36 in forum General HelpReplies: 8Last Post: 06-29-2009, 07:27 AM -
oxygen sensors
By shadowsnkx in forum External EngineReplies: 7Last Post: 07-07-2008, 09:23 AM -
oxygen sensors
By 97RAMAIRTA in forum General HelpReplies: 2Last Post: 02-07-2007, 06:35 AM
Bookmarks