Results 1 to 6 of 6
Thread: OBDII Codes
-
09-07-2006, 12:02 PM #1
- Join Date
- Jan 2006
- Location
- Albuquerque, NM
- Age
- 67
- Posts
- 13
White- 2000 Trans Am
OBDII Codes
I have a 2000 T/A with K&N filter and descreened MAF . I've been running Superchips performance tune for a couple of months now. This morning I got an SES light. I scanned for codes and found two of them, PO172 and PO175: "Running rich on right and left banks".
Any ideas on where to start checking?
-
09-07-2006, 02:30 PM #2
What mods? I would clean the maf and ditch the k&n. I'v heard alot of issues with per. chips here lately.
Is it a custom tune?
J2001 SS, Its not the car its the Driver that matters....
-
09-07-2006, 03:13 PM #3
- Join Date
- Jul 2005
- Location
- Jacksonville, FL
- Posts
- 2,723
Might be the MAF descreening - maybe their tune assumes it's stock? Then maybe not since it's been a couple months? Something easy would be to return the PCM to stock tuning and see if it comes back if you're running the canned tune.
-
09-08-2006, 03:54 PM #4
- Join Date
- Jan 2006
- Location
- Albuquerque, NM
- Age
- 67
- Posts
- 13
White- 2000 Trans Am
Not a custom tune. Just Superchip's tune. I set the shift points and firmness.
I will clean the MAF and see if that helps. I normally clean the MAF a few days after cleaning and re-oiling the K&N. But I didn't do it the last time which was a few weeks ago. I hadn't thought of that. Most likely that is the cause.
Thanks for the help.
-
09-08-2006, 11:08 PM #5
Yepp Yepp let us know if it fixes your issue
J
-
09-12-2006, 10:33 PM #6
- Join Date
- Jan 2006
- Location
- Albuquerque, NM
- Age
- 67
- Posts
- 13
White- 2000 Trans Am
Looks like cleaning the MAF took care of it. No SES light so far.
Thanks again for the help.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Resetting OBDII
By johnfin in forum Firebird / WS6Replies: 0Last Post: 09-05-2012, 05:20 AM -
Resetting OBDII
By johnfin in forum Computer & TuningReplies: 21Last Post: 07-05-2012, 06:16 AM -
Help: '94 OBDI vs. '96 OBDII
By prater_1 in forum LT1Replies: 13Last Post: 02-13-2011, 01:56 PM -
How to program out O2 codes and still pass OBDII emissions test?
By jcob2 in forum Computer & TuningReplies: 7Last Post: 03-23-2007, 09:29 PM -
Decipher your OBDII Codes
By Ed Blown Vert in forum Computer & TuningReplies: 0Last Post: 11-16-2005, 03:06 PM
Bookmarks