Results 1 to 7 of 7
Thread: nothing
-
09-07-2008, 11:59 AM #1
nothing
new issue I was driving to a friends house stopped at a light. Went to put it in first gear and the shifter moves all the way to the front. It doesn't find anygear feels like its disconnected. Is there a linkage or something I all i did was take it out of 6th which it was driving fine. Put it in neutral at the light then tried to shift into first. this is on a m6 by the way.
-
09-07-2008, 03:52 PM #2
Take a look at your linkage underneath...
J2001 SS, Its not the car its the Driver that matters....
-
09-07-2008, 05:16 PM #3
uuuummmm........ isn't a T56 a top loader?
-
09-07-2008, 05:34 PM #4
- Join Date
- Nov 2007
- Location
- SATX
- Posts
- 847
Pewter- 2000 Trans Am
so did you drive the car after that? sounds strange. but I get that alot on my diesel truck but thats due to worn syncros.
-
09-07-2008, 08:30 PM #5
I found the problem I have the pro 5.0 with the short shifter two bolts hold the short shifter in. One had came loose but was still in on side so when you looked at it from the driver side it looked in. So what had happened was the shifter was just pivoting on the second bolt, I tightened the loose bolt and it's good to go.
-
09-08-2008, 05:34 AM #6
- Join Date
- Sep 2008
- Location
- Saint Cloud,FL
- Age
- 46
- Posts
- 194
1994 Z28 MQBM- 2001 SS #1629 LPM
a dab of loctite probably wouldn't hurt either. At least you found it.
www.fquick.com/ntimid8r7
www.cccfonline.com
Triple H Coating
Specializing in Powder and Ceramic Coating
steve@triplehcoating.com
www.triplehcoating.com
-
09-12-2008, 08:05 AM #7
i found the problem 3 pennys and a dime got in the shifter path they were all crunched up i'll post pix.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks