need to know where the bleeder for the clutch is

**Big D Squared** · 07-16-2012, 08:44 PM

Trying to change the clutch fluid and can't find the bleeder just bought the mity vac to do it with can someone post pictures plz

***SMWS6TA*** · 07-17-2012, 09:16 AM

the bleeder valve is on the drivers side of the bell housing. It's a 2 person job unless you have a speed bleeder form tick performance. Bleeding the hydraulics is a major PITA.

**Big D Squared** · 07-17-2012, 11:33 AM

Well I just bought the mity vac is there anyway son Leone can take a picture of the blender valve plz ?

**blackcar** · 07-17-2012, 01:19 PM

There is no room to get a camera in there. This is about the best description I've found. http://www.ls1.com/forums/f65/manual...ion-faq-20520/

Or this video. Skip to the 10 min mark

BTW guessing you have auto correct. I'm not Leone's son and I don't know where your blender is. lol

***SMWS6TA*** · 07-17-2012, 01:29 PM

You can see this in this video above at 3:48

You need to get the car on jack stands, once you're under it look for the hydraulic hose that is breaded steel. It will go between a heat shield and the body of the car then into the drivers side of the bell housing. Now look above the hose. you will see the bleeder valve.