Results 1 to 4 of 4
Thread: Need help !!!
-
05-06-2009, 05:04 PM #1
- Join Date
- May 2009
- Location
- texas
- Posts
- 11
black- 2002 camaro Z-28
Need help !!!
Crank sensor and wires were burnt replaced and did crank relearn. But still having all cylinders misfiring. Checked o2 sensors and they are working fine.Done every thing below also. having a problem with my LS-1.I have changed the coils , coil wiring harness ,fuel injectors , plugs , plug wires, and still having a misfire code pop up on cylinder 8. Also done compression and compression is fine. The car misfires on and off. If anyone has any sugestions let me know. i need help. thanks in advance .
-
05-06-2009, 05:07 PM #2
How did the wires get burnt? Did you fix all the wires in the harness? What codes are you throwing?
J2001 SS, Its not the car its the Driver that matters....
-
05-06-2009, 05:20 PM #3
who did your crank relearn and what software did they use?
-
05-06-2009, 06:35 PM #4
- Join Date
- May 2009
- Location
- texas
- Posts
- 11
black- 2002 camaro Z-28
Dont know how wires got burnt fixed all the wires.was throwing code 308 misfire code before fixing it.now its throwing 300 random or multiple misfire code.on the techII scanner all cylinders are misfiring.used the software on snap-on scanner
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks