MTI Clear Lid

[blk_jaws]

Where can I get a MTI Clear Lid? I see a lot of people with them but I can't find them for sale. Thanks

[oneBADDz]

don't remember gimma a sec to look it up, 130 bucks. I love mine

[oneBADDz]

http://www.motorsporttech.com/fbody_air_intake01.asp

[02z28ls1]

I've had one for about 4 years now-no problems -looks cool as hell.There is an increased noise issue with any of these non factory airlids from the air pump intake not being sound shielded any more-sounds like a vacuum cleaner running under the hood for about a minute under cold start up-not an issue inside the car though,just from outside the car. Not a big deal to me.

[oneBADDz]

I've had one for about 4 years now-no problems -looks cool as hell.There is an increased noise issue with any of these non factory airlids from the air pump intake not being sound shielded any more-sounds like a vacuum cleaner running under the hood for about a minute under cold start up-not an issue inside the car though,just from outside the car. Not a big deal to me.

haha, lucky for me 98-99 and maybe 00 i don't rememebr what year it changed, don't have that hose that runs into the box so it's quite as could be all the time

[ss~zoso~ss]

yea no noise change here, although i can hear my Air pump when it kicks on

[tx77015ls1]

i got a used one with a set of blue MAF ends both for $50 With the lid K&N filter, blue maf ends and free ram air i went from a 13.5@102 stock to a 13.376@104

[98_Formula]

i have one you could have for $85 shipped... pm if interested i have pics avail

[MdFormula350]

i know a place or two, u have a pm.

[baseballss]

what is that hose that connects to the air lid, mine is supposed to have one its a 2000 but it wasnt there when i bought the car. ???? its just a hole there in the lid ? could that cause any problems?? codes??

[Danger731]

I believe only 01,02's use the hose out the lid, a change in emmisions. Just throw some tape over the hole. you must have a lid for another year

[baseballss]

hmmm.... hope so

[baseballss]

well... ive been lookin all over cardomain at 2000 z28's and ss's and they all have the hose that connects to the air lid. im starting to worry now. what exactly does that hose do??

[SeVeReDiStOrTiOn]

well... ive been lookin all over cardomain at 2000 z28's and ss's and they all have the hose that connects to the air lid. im starting to worry now. what exactly does that hose do??

The air pump hose is in the lid from 00-02...the prior owner probably removed it. The hose goes to the pump for the A.I.R system...nothing to worry about, you can always put in the hose back in.


Is the whole AIR system removed also?

[02z28ls1]

More to the point-it picks up filtered air for the air injection pump -and it silences the same-I've read that there are federal noise standards that have to be met by the OEM.Without the stock air lid and a K+N filter on the hose it sounds like a vacuum cleaner running -with the stock lid and the hose hooked up,you don't hear anything.

[keliente]

I have one I'd sell for $90.

[tx77015ls1]

i put a breather at the end of the hose and tied it out of the way

[baseballss]

i cant even find the hose at all??? its like its not there anymore

[fister main]

do you still have this ?? will it fit a 2000 Z-28 ??