Lights/abs/inop

**98maro** · 06-21-2010, 12:46 PM

Hey guys my car is trippn.
It had the abs/inop light on. Asr light on. Breake light on. Ant the switch for the asr didn't work
so I was told it need new abs front sensors.
And I was goin to the shop.
I went like 5 diferent shops to see if they could check it out n see wats wrong
my engine light came on
n the light for the gas came on too
so I went to put gas. And when I was bout leave
I noticed all the lights were off
I was like oh shit wat happnd.
The engine light still there but all the other ones are off?
No one havnt scan the PCM

**Cutlass** · 06-21-2010, 05:53 PM

Just find someone to scan the ABS and Service Engine codes and post them up here. Otherwise we are gonna keep playing this guessing game here on what gonna fix your car up.
GO GET IT SCANNED!

**98maro** · 06-21-2010, 06:30 PM

Ok I will
sorry lol
I takin it tomorow
it's gonna be 150 jst to tell me wat it is

**DaddySS** · 06-22-2010, 12:38 AM

Many auto parts stores will scan it for free - check there first.

**98maro** · 06-22-2010, 08:41 AM

I went to autozone and some other auto parts stores
and they dnt do that anymore

**blue02Z** · 06-22-2010, 09:50 AM

Your posts crack me up dude

**35th-ANV-SS** · 06-22-2010, 09:50 AM

Most auto parts stores don't have ABS scanners. They only have OBDII scanners.

So you can scan your SES codes at an auto parts store. You'll have to have a mechanic or dealership scan for the ABS codes unless you buy a scanner yourself.

I think I said this in one of your other threads regarding these same issues...

**98maro** · 06-22-2010, 10:24 AM

I got the codes now
I was told the rear/right tire speed sensor is messed up
C0050
C0550

the SES light on cuz the hose on the side of the air lid
was unpluged

**Cutlass** · 06-22-2010, 05:15 PM

Alright we are FINALLY getting somewhere on this car.

C0050 RR Wheel Speed Circuit Malfunction. Usually means you need a new right rear wheel speed sensor but look over the wiring quick for obvious wire/connector problems (corrosion, broken, pinched, disconnected wires,etc)

C0550 ECU Malfunction. Usually means you have an internal failure of the EBCM (Electronic Brake Control Module...aka the ABS module)

**98maro** · 06-22-2010, 06:01 PM

Thanks for the answer on the codes
I'm gonna check if if it's unpluged cable or somethin
but I'm sure the sensor is not good anymore
cuz he took the car for a test drive
and that sensor was ready lower speed than the other sensor on the left tire
c0550 he said that code is because the sensor is messed up
I'm takin the car on Friday so it can get fixed