Interior lights quit working: ASR and Lower Fog

[CJoel]

Is there a fuse for these?

Im talking about the 2 switches in the middle of console

1 is for the ASR and the other turns on/off the lower fog lights

When I switch the ASR off, dash still tells me "ASR Off" but it seems the fog lamps are not working at all

[sunsetorangess]

There is a fuse in the block and it just so happens to control your fog lamps and your interrior lamps, there is also a relay...
Chaces are its loose, or bad.
J

[rbob93]

Or the foglamps are burned out

[CJoel]

Thanks for replies

So if the fog lights burn out they will blow the fuse that controlls the interior switches ?

I would think the switches would still work and light up even if the outside bulbs so bad ( and both at the same time ? Somehow I doubt it)

And why would the ASR light go out too

[CJoel]

There is a fuse in the block and it just so happens to control your fog lamps and your interrior lamps, there is also a relay...
Chaces are its loose, or bad.
J

I will see if I can find it

Do you know which one it is ?

The relay would be where ?

[CJoel]

I checked the fuse diagram but dont see any that mention fog lamps or ASR etc

For some reason the Fog Lamp switch now lights up, and one of my bulbs isnt working

Not sure whats going , but how hard is it to replace bulb?

[rbob93]

So if the fog lights burn out they will blow the fuse that controlls the interior switches ?

The only thing that blows a circuit breaker or fuse is a short.
I was just suggesting that the bulbs maybe burned out.

[CJoel]

The only thing that blows a circuit breaker or fuse is a short.
I was just suggesting that the bulbs maybe burned out.

Ok thanks

Is the bulb hard to remove from the lamp ? Im guessing you pull it from under the car? Just twist out like the headlamp bulb ?

[sunsetorangess]

The fog lamps come out as an assembly...
J

[CJoel]

FYI

Changed the one bad bulb and the interior lights are now working as normal

[rbob93]

^^ Cool
Was it as easy as others have stated?
Never changed one myself.

[CJoel]

^^ Cool
Was it as easy as others have stated?
Never changed one myself.

Sorry for the late response

It wasnt that hard to change out just 2 10 mm bolts and just be sure to remember exactly what position the bulb is inserted because visibility is poor

Basically, you cant really see what you are doing unless you got completely under the car, but you can easily reach it with your hand so try to remember the bulb alignment

It only fits one way