This is a discussion on important question!!!!! within the General Help forums, part of the LSx Technical Help Section category; i have a 99 ss m6 and i need a block. well i came across block for really cheap and ...
09-12-2007, 12:44 PM #1
i have a 99 ss m6 and i need a block. well i came across block for really cheap and im wondering if it will work with my heads, intake and everything else. these are his words " its an 86 350 with 4 bolt mains, passenger side dipstick, forged internals". i dont know much about the older 350 blocks but id like to know if i can use my heads and intake..........replies will be greatly appreciated.
09-12-2007, 01:49 PM #2
- Join Date
- Feb 2007
- San Diego, CA
2002 Z28 A4 NBM
- Sadly now demodded :(
I think we've (the forum that is) been down this road before. Nothing from a Gen I SBC will interchange with a Gen III SBC. Even the bell housing pattern is different. The only similarities are the bore spacing at 4.40".
That block would be perfect for a 3rd gen or earlier.
09-12-2007, 02:35 PM #3
ahhh i see......i kinda figured that but it never hurts to ask. thanks!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By TransAmcoupe98 in forum Internal EngineReplies: 12Last Post: 09-06-2007, 04:41 PM
By joliver2 in forum Camaro / SSReplies: 16Last Post: 05-03-2007, 01:32 PM
By 1bad99ss in forum Stereo and ElectronicsReplies: 1Last Post: 03-23-2007, 11:18 PM
By 1bad99ss in forum DrivetrainReplies: 9Last Post: 02-27-2007, 08:11 PM
By schtick in forum Internal EngineReplies: 4Last Post: 05-16-2006, 05:49 PM