Results 1 to 13 of 13
Thread: how much oil?
-
12-28-2007, 02:36 PM #1
how much oil?
Rebuilding my first ls1,how much oil do I need? 5 or 6 qts?
-
12-28-2007, 03:15 PM #2
5.5 actully
-
12-28-2007, 03:42 PM #3
stock is 5.5 but I think you can get a bigger filter and some people use aftermarket coolers that would also require more just be sure to check it
-
12-28-2007, 04:03 PM #4
stock everythng with AC Delco filter. Thanks. Any idea on the tranny fluid, and coolant capacity?
-
12-28-2007, 05:10 PM #5
-
12-28-2007, 06:18 PM #6
- Join Date
- Aug 2005
- Location
- Thornton, CO
- Posts
- 23,773
Red Tint Jewelcoat- 2008 Trailblazer SS
M6 tranny is 4 quarts.
I never went with a set amount of coolant. Always filled, warmed, checked, filled
-
12-29-2007, 10:59 AM #7
auto tranny is like 12 qts from empty
-
12-29-2007, 12:24 PM #8
i always use 6 quarts
-
12-30-2007, 10:01 AM #9
no offense but you are attempting to rebuild and engine and your not sure about the oil capacity?? Maybe you should be getting someone to rebuild that engine for you.
-
12-30-2007, 12:44 PM #10
I put six quarts in and it reads perfect. Last time when i put 5.5 in it showed that it was a little low.
-
12-30-2007, 04:32 PM #11
I dont have the book for the car. Knowing its a 350 I was assumng 5-6 qts, and I know how to read a dipstick. And I do have someone building it with me.
-
12-30-2007, 05:12 PM #12
- Join Date
- Jan 2007
- Location
- STL
- Posts
- 126
RED- 2001 CAMARO Z
six it is
-
12-31-2007, 01:04 PM #13
like stated above it calls for 5.5 in the manual, i run the oil filter for a trailblazer to give extra capacity and put 6 in it.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks