Results 1 to 8 of 8

How to install a baby seat/tether clip in my Z28?

This is a discussion on How to install a baby seat/tether clip in my Z28? within the General Help forums, part of the LSx Technical Help Section category; Ok we have a baby due in June and we want to bring him home from the hospital in our ...

  1. #1
    Junior Member JSGTPD's Avatar
    Join Date
    Apr 2006
    Location
    Ontario
    Age
    39
    Posts
    24

    White
    2000 SLP SS

    How to install a baby seat/tether clip in my Z28?

    Ok we have a baby due in June and we want to bring him home from the hospital in our Z28, so how do we install the baby seat? There is no tether clip so where or how do we install it??

  2. #2
    Senior Member
    Join Date
    Jul 2005
    Location
    Jacksonville, FL
    Posts
    2,725
    First of all congratulations! There should tether clips on the rear deck. Or do you mean on the seat itself? Surely all baby seats come with them now...if one didn't come with the seat contact the manufacturer...maybe they're optional or something? Sorry for my ignorance, both my babies just ask for the car keys now.

  3. #3
    Junior Member JSGTPD's Avatar
    Join Date
    Apr 2006
    Location
    Ontario
    Age
    39
    Posts
    24

    White
    2000 SLP SS

    Thanks!!

    So on the rear deck, thats just above the back seats?? I'm goning to check first thing tomorrow morning.

  4. #4
    SUPREME member-oderator oneBADDz's Avatar
    Join Date
    Nov 2005
    Location
    Lost in Texas
    Age
    33
    Posts
    2,683

    Custom Slate Blue
    99 B4C

    99 didn't have the clips yet

  5. #5
    Junior Member JSGTPD's Avatar
    Join Date
    Apr 2006
    Location
    Ontario
    Age
    39
    Posts
    24

    White
    2000 SLP SS

    Yep I just checked and nothin! Is there a way I can have one installed???

  6. #6
    Junior Rocketeer jimmi7769's Avatar
    Join Date
    Sep 2005
    Location
    Russiaville, Indiana, United S
    Posts
    186

    Sunset Orange
    2001 Z28

    On my '94 T/A i used to just strap it in with the seatbelt. I couldn't use the little base that came with the carrier, but with the three point belt in the carrier and the seatbelt along with it being wedged in there between the front seat and the back seat he was pretty secure.

    He's going to be 5 in june so it works.

  7. #7
    Senior Member SeVeReDiStOrTiOn's Avatar
    Join Date
    Aug 2005
    Location
    Roseville, CA
    Posts
    8,164

    05 Wrangler
    00 Z28 sold :-(

    Quote Originally Posted by JSGTPD
    Yep I just checked and nothin! Is there a way I can have one installed???
    I'm sure you could...ask the dealer if they sell them. They're pretty much just a big bolt and a loop for the seat to hold on to. My 89 iroc had tethers but they were for the t-top holder...but they look the same which is kinda weird

  8. #8
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,468

    98 Formula
    06 duramax

    You can get away without all of that. There's a clip you can buy for just a couple of bucks that basically sandwiches the seat belts and you run them through the back of the car seat. They make fancy models for $20 but I think you can buy the ones like we used for around $5. Check out a baby store near you. I can take a picture of mine and send to you if that would help. It's just a little clip that you slide the belts over and it locks in a set length of belt. You can actually get the seat really snug with that. I used it for a couple years for the boy's seat.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •