how do i remove pcm

[jmatt07]

doing h/c/i change and getting a mail order tune. im sure this is a dumb question but how do i get the pcm out. it looks like its bigger than the hole it has to come out of.

[98formy]

There's like two bolts that hold down that plastic thing it sits in. Take those out and the pcm is loose. I had to also get the plastic cowl loose by taking out the rivets. Use a pic or something like it to pry up on the center of the rivet, then the whole thing will pop put out of there. With that loose, you can wiggle the pcm out of there, it needs to be just right to get it out of there.

[JoshieDoom]

There's like two bolts that hold down that plastic thing it sits in. Take those out and the pcm is loose. I had to also get the plastic cowl loose by taking out the rivets. Use a pic or something like it to pry up on the center of the rivet, then the whole thing will pop put out of there. With that loose, you can wiggle the pcm out of there, it needs to be just right to get it out of there.

Yep. 10mm and 7mm is all you need

[2001NBMZ28]

Probably doesn't need to be said, but make sure the ignition is in the off position and the battery is disconnected.